These parts are just laying around, need to find a new home.

TEA 5.3 heads 2.02/ 1.57 valves, dual valve springs, milled to 59cc's, flowed 295 cfm int. One head is said to have a slight crack in it. But I put 5K miles on it the year before with no problem. I'm sure it can be welded and fixed.
I have the flow sheet for them. I have 1300 in these.
Will take $475.00 shipped. SOLD!

G5X3 copy cat cam. Comp 234/242 591/601 114 lsa. Worked great with heads above. Comp cam sheet with it.
$275.00 shipped. Sale pending.

QTP dual cutout Y pipe with both motors and switch. One minor dent in left lower pipe. Only 4K miles. $500.00 shipped. SOLD!

Money order or certified check only accepted. PM me for faster response.

 

what kind of power did u make with this head cam set up

 

I did not get a chance to dyno it before I took it apart. But I would guess it was around 430ish with the fast 90mm.

 

Who told you the head was cracked? Any pics of the crack or where its located on the head?

 

Here's the pics I do have.

 

PMs replied.

 

I need some more info on the crack in the heads, but am willing to give 700 shipped for the heads and cam if the crack is not in too bad of a spot.

 

New PM sent this morning

 

All PMs replied fellaz. Thanks.

 

Pm'd u back.

 

Sale pending on all parts as of now. Thanks guys.

 

All parts are now sold. Thanks guys.