I just installed a complete LGM cam kit which included 921 springs, Ti retainers, seats, etc. along with hardened Comp push rods. Shortly thereafter the Felpro 1041 head gaskets began leaking oil (they neglected to send any instructions indicating that these gaskets need to be heat cycled and retorqued 3 + times). Anyway, since I'm pulling the heads I decided to go with TFS. Thus, all these parts have less than 200 miles on them (except the heads which have ~17k miles).

243 castings with 921 spring kit installed 650.00 shipped or will seperate springs/heads
250.00 shipped for spring kit and 400 for heads if seperated.

Comp Chrome Moly Pushrods 70.00

Stock rockers SOLD

Crane dual valve spring installation tool SOLD

 

Do those prices include shipping? if not how much for the pushrods shipped to 79938

 

Yhpm.

 

Prices include shipping on all items but the heads. Thorny, thanks for the PM, let me talk with the tuner tonight so I can see where everything is at (timelines, etc.) and I'll get back with you soon. Thanks

 

will you take 60 for the push rods shipped i can send you the payapl right now pleae let me know

 

I can do 60.00 shipped on the pushrods but they won't be shipped until the weekend. If you are not in a rush let me know. Thanks

 

Payment sent for spring tool.

Thanks,

d

 

Spring Compressor sold, thanks Dan!

 

ttt, heads, springs and push rods still for sale

 

PM'd you on the rockers
bumped you too.

 

</noob on>
What is the approx max intended lift of the 921 springs?
TIA
MV

 

Thanks Mike, replied to your PM. 921's are rated fairly conservatively to .630 lift, but many run them to .650 without problem. Let me know if you are interested in the springs or heads, I'll cut you a good deal to get them out of the garage .

 

Those are awesome heads, but my budget is blown for another couple weeks.
You have paypal on the rockers.
Thanks for the PM's
Mike

 

back up to the top

 

Will go 450.00 shipped on the heads before I list them on ebay, thanks.

 

Do you still have the 921's

 

I do still have the 921's. The original buyer decided that they were too much for his application. Let me know if you have any questions. Thanks

 

bottom line on springs and heads? pm me.

 

PM Sent, thanks

 

Updated prices, deal fell through on the springs so those are still available.