All parts out of my 1996 Chevrolet Camaro Z28

Paypal is Mike96z@yahoo.com (wont ship until $ is cleared unless its immediate payment.) Also add 3% for the paypal fee. Locals who wanna do paypal, must be instant transfer or pickup after the $ clears.

Cash if your local or paypal (must be instant transfer or wait til $ clears)

Prices are pretty firm but pm me for more info on the parts, 15k on everything on this motor, except the accesories. So parts will be available this weekend. No pics at this moment because the motor is currently fully assembled. Will ship, buyer pays shipping. I may have forgot some things, so adding parts when i think of them. Will get pics when I pull the engine this weekend. So if interested in parts pm me and let me know so that I will consider you, first come, first serve or first to get me the $$$ when i confirm these are available. I cannot guarantee that if you want the part that you will get the part, if someone gets me the $ first, they will get the sale, i prefer local but will ship. I have a list of who is all in line for the parts, if it says SALE PENDING it means that I have not recieved cash and it could or could not go through. If I recieved $ it will say sold!

Ported & Polished Throttle Body w/ Air Foil - (LT1 Throttle Body that was ported and polished and matched to the Intake, it is around 54-56mm and the outside as well as inside are polished to a mirror finish, also includes an air foil) $100.00 or $114.00 Shipped (+ 3% paypal fee) *Pic* http://i207.photobucket.com/albums/bb171/mike96z/tb.jpg ** http://i207.photobucket.com/albums/b...ike96z/tb3.jpg ** http://i207.photobucket.com/albums/b...ike96z/tb4.jpg

Powersteering Pump - (Powersteering pump, comes with powersteering hoses and one of the hoses has a leak but the others are fine) $25.00 or $30.00 Shipped (+ 3% paypal fee)

Accessory Bracket - (Holds all the accessories, the alternator bolt that goes to the top was stripped so I put a bolt threw it with a nut for extra strength and I will include bolt w/ nut) $20.00 or $30.00 Shipped (+ 3% paypal fee)

All Hoses to LT1 - (All hoses, no a/c hoses, all hoses to radiator etc.) $40.00 or $50.00 Shipped (+ 3% paypal fee)

Holley Adjustable Fuel Pressure regulator with Stock Injectors - (new Holley adjustable fuel pressure regulator, stock injectors, no fuel rail) $90.00 Shipped (+ 3% paypal fee) http://i207.photobucket.com/albums/b...z/fuelrail.jpg ** http://i207.photobucket.com/albums/b.../fuelrail4.jpg ** http://i207.photobucket.com/albums/b.../fuelrail2.jpg

Alternator - (Stock alternator, recently replaced with lifetime warranty) $50.00 or $60.00 Shipped (+ 3% paypal fee) http://i207.photobucket.com/albums/b...alternator.jpg

March Underdrive Kit - (Underdrive kit is black with crank pulley and alternator pulley complete with hardware) $50.00 or $60.00 Shipped (+ 3% paypal fee)
*Pic* http://i207.photobucket.com/albums/b...6z/pic0112.jpg ** http://i207.photobucket.com/albums/b...alternator.jpg

MSD Coil - (Black MSD Coil) $35.00 or $45.00 Shipped (+ 3% paypal fee)
*Pic* http://i207.photobucket.com/albums/b...6z/pic0122.jpg ** http://i207.photobucket.com/albums/b...6z/MSDCoil.jpg

Pioneer Rocker Arm Locks - (These are a good brand, pioneer, coated and they are the allen wrench adjustable type and will never come loose) $35.00 or $45.00 Shipped (+ 3% paypal fee) http://i207.photobucket.com/albums/b...e96z/locks.jpg

Chrome 7QT Race Pan - (The exact same type on the short block, no skid plate, has small leak on one corner of the pan and will just need a small weld and is new, ran for about 1k) $35.00 or $45.00 Shipped (+ 3% paypal fee) http://i207.photobucket.com/albums/b.../ChromePan.jpg

NEW MAP SENSOR - (new with warranty) $20.00 Shipped

Ignition Control Module - (new with warranty and stock coil with heat sink) $30.00 shipped

Knock Sensor - (slightly used, works great) $15.00 Shipped

Misc Sensors on Intake Manifold - (make offer) Make Offer!

98-02 SS wing aftermarket $200 http://i207.photobucket.com/albums/b...96z/sswing.jpg

ALL PARTS WILL BE SHIPPED FEDEX AND TRACKING NUMBER PROVIDED! WILL SHIP AS SOON AS POSSIBLE!

PICS AVAILABLE ON REQUEST, PRICES ARE OBO!

 

Updated.

 

I'll also take plug wires,tranny mount,and lifters depending the condition and miles... pm'ed u

 

i updated the listing has all the info you should need, im keeping the tranny mount for my ls1 conversion, i think they are the same. if not you can buy it. pm replied

updated list, easier to read.

 

didint read first part hope he doesnt show up I need that shortblock bad..

 

i decided to part it, so all parts are for sale!

 

cool I'll pay u for it thursday when I pick up front end and spoiler. what time should I come buy also pm me your adress. I have a g2 cai if u want to trade that for your ls1 conversion intake.?

 

alright

 

How well do the heads flow? And only 200 bucks for em?

 

They flow really good, they were on this engine, with that huge cam, and 1.6 rockers and it was a torque monster but it was matched with the intake/throttle body, so they have to be flowing well or the engine would have ran like crap, I shipped them to my father who builds race cars and he matched the intake/throttle body/heads to each other and got the valve job and everything on the heads and got the springs put back on. Everything has 15k since the build and I use to have a before and after pic of the heads side by side but lost them. He had them flow tested but he doesnt have the sheet, he told me that they flowed a little better than LT4 heads.

 

Updated!

 

I will takes the trans today if you don't sell it. Just call me and I will pay you immediately.

Amber

 

pm sent

 

updated x2

 

6 Speed Transmission
Stock PCM
Spare Wiring Harness
Clutch Slave/Master Cylinder
Stock Flywheel

ALL ABOVE WERE SOLD!

 

Optispark Sold!

 

I am interested in the following.

Ported and Polished Heads w/ Crane Cams 10308 Valve Springs - (LT1 castings, flow a little better than LT4 heads, fully ported and polished and gasket matched, fresh valve job, cleaned up everywhere, real nice and come with Crane Cams 10308 Valve Springs http://store.summitracing.com/partd...15&autoview=sku ) $200.00 Sale Pending

Powdercoated (Red) LT1 Ported & Polished Intake - (This is a ported and polished intake, that has been powdercoated red and has been gasket matched and ported and matched to the heads and throttle body I have, it has been cleaned up alot and bored for 58mm) $100.00 *Pic* http://i207.photobucket.com/albums/...96z/pic0113.jpg ** http://i207.photobucket.com/albums/.../0831072330.jpg

Ported & Polished Throttle Body w/ Air Foil - (LT1 Throttle Body that was ported and polished and matched to the Intake, it is around 54-56mm and the outside as well as inside are polished to a mirror finish, also includes an air foil) $100.00 *Pic* http://i207.photobucket.com/albums/...96z/pic0113.jpg ** http://i207.photobucket.com/albums/.../0831072330.jpg

But i would like to know the specs on the heads.

Thanks

irbs

 

Also these.

Chrome Valve Covers w/ Breather - (This is a set of centerbolt chrome valve covers, look just like the stock ones and cleared my rockers fine, they are in excellent condition and still shine.) $25.00 *Pic*

If they are still avaliable.

 

valve covers are still available, heads have a sale pending locally and others in line but the intake/throttle body are still up for grabs. You can come take a look at them either thurs or friday.

 

UPDATED! 1.6 Rockers SOLD!