Vehicles For Sale - LSX Powered ONLY ONLY LSX POWERED VEHICLES - NO TRADES UNLESS YOUR VEHICLE IS LSX POWERED!!!!!!

98 Z28 SS (clone) For Sale

 
Thread Tools
 
Search this Thread
 
Old Sep 22, 2007 | 12:06 PM
  #1  
ashade98's Avatar
Thread Starter
TECH Apprentice
iTrader: (16)
 
Joined: Jul 2004
Posts: 305
Likes: 0
From: Boise, ID
Default 98 SS (clone) VERY FAST (new price)

SOLD


This car has been my pride and joy for the last 6 yrs. I never planned on selling it, so I've spared no expense!

It's a NBM Z28 T-56 hardtop with GM SLP SS Hood and Spoiler w/ Flame red stripe, beige leather, power driver seat, NEW SS floor mats (you'd have to check the vin# to know that it's not an SS).

Extremely meticulously maintained, Mobil 1 every 3,000 mi. 84,000 mi on the clock. However, everything has been replaced with high performance parts, with exception to the short block, and the 6 speed transmission.

Heads, Cam, Etc. only have approx. 1000 mi. (flow sheet and receipts avail.)



| Exedy hyper single (4000 mi) with Findanza aluminum flywheel
| Hurst short throw w/umi short stick
| LS6 intake, w/ TSP lid, ported and polished throttle body by Thunder Racing
| Hand polished valve covers, timing cover, etc. (polished by yours truly )
| Optima red top
| PRC 5.3L stg 2.5's, new TR 55's w/ MSD wires
| TSP pushrods, Comp Lifters
| ARP head studs
| Pacesetter race LT's w/ SS Breslin split locks
| TSP ORY
| Flowmaster American Thunder catback
| Powerbond pulley, new belts
| Rollmaster Double
| TSP ported oil pump
| TSP 224R, 112 w/ cam card
| Poly motor/tranny mounts
| Inland Empire high strength 3" 6061-T6 aluminum drive shaft
| BMR rear suspension (adjustable torque arm, pan hard,) lower control (w/ sphon relocation brackets), sub frames, Eibach springs w/ KYB 5 way adjustable shocks, strut tower brace.
| 4.11's w/ TA Girdle cover
| Corvette Magnesium Rims w/ 295 30 18's on rear, 275 40 17 on front (tires like new)
| MBA billet aluminum pedals
| Tuned w/ HP tuners (personal copy on laptop... negotiable)
| Racetronix fuel pump (not installed... factory unit is still working perfect)
| JL audio 10" in custom rear fender enclosure with amp.
| Just passed emissions!!!
I also have the stock heads and cam if interested
Owned outright, clean title.
Over $30,000 invested!

Asking $10,500 obo In Boise Id.
Contact Aaron: ashade@pacbell.net or 208-890-1326... I don't check my PM's very often!











more pics on request! Thanks for lookin'!

Last edited by ashade98; Oct 29, 2007 at 09:05 PM. Reason: updated
Old Sep 23, 2007 | 10:15 AM
  #2  
ashade98's Avatar
Thread Starter
TECH Apprentice
iTrader: (16)
 
Joined: Jul 2004
Posts: 305
Likes: 0
From: Boise, ID
Default

Dropped the price a little... Don't want to be such a "proud owner". This car is CLEAN + FAST!!!
Old Sep 23, 2007 | 03:39 PM
  #3  
ThumperNC24's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: May 2006
Posts: 523
Likes: 0
From: Elmhurst, IL
Default

pm me if you would be interested in a 94 formy a4 w/73k miles and cash
Old Sep 24, 2007 | 08:04 AM
  #4  
ashade98's Avatar
Thread Starter
TECH Apprentice
iTrader: (16)
 
Joined: Jul 2004
Posts: 305
Likes: 0
From: Boise, ID
Default

Never raced... This car was babied by the **** owner (me)!
Old Sep 24, 2007 | 09:03 AM
  #5  
myfirstmullet's Avatar
Staging Lane
iTrader: (1)
 
Joined: Jan 2007
Posts: 74
Likes: 1
From: knoxville, tn
Default

you interested in any trades???
Old Sep 24, 2007 | 10:58 AM
  #6  
SSBound's Avatar
On The Tree
iTrader: (3)
 
Joined: Feb 2007
Posts: 126
Likes: 0
From: Belton tx, youngsville la
Default

is it still the stock rearend w/ 4.11's. or is it a 9 in or 12 bolt?
Old Sep 24, 2007 | 06:45 PM
  #7  
ashade98's Avatar
Thread Starter
TECH Apprentice
iTrader: (16)
 
Joined: Jul 2004
Posts: 305
Likes: 0
From: Boise, ID
Default

Stock 10 bolt with 4.11's and a TA aluminum girdle, gears have about 5,500 mi on them, quiet as stock
Old Sep 24, 2007 | 08:59 PM
  #8  
trik396's Avatar
TECH Apprentice
iTrader: (4)
 
Joined: Aug 2007
Posts: 337
Likes: 1
From: Crown Point, IN
Default

Any idea as to what kind of numbers she'd put down on a dyno?
Old Sep 24, 2007 | 09:38 PM
  #9  
ashade98's Avatar
Thread Starter
TECH Apprentice
iTrader: (16)
 
Joined: Jul 2004
Posts: 305
Likes: 0
From: Boise, ID
Default

Hasn't been on a dyno... I'd have to guess anywhere from the low to mid 400's. Judging by similar setups I'd think 425 +. No proof however.
Old Sep 25, 2007 | 06:24 PM
  #10  
ashade98's Avatar
Thread Starter
TECH Apprentice
iTrader: (16)
 
Joined: Jul 2004
Posts: 305
Likes: 0
From: Boise, ID
Default

Up Up for the evening!
Old Sep 25, 2007 | 10:29 PM
  #11  
SSBound's Avatar
On The Tree
iTrader: (3)
 
Joined: Feb 2007
Posts: 126
Likes: 0
From: Belton tx, youngsville la
Default

hey bro really interested in it. be honest, what are the down falls if any? why are you selling it after you put these mods on there not to long ago?
Old Sep 26, 2007 | 08:13 AM
  #12  
ashade98's Avatar
Thread Starter
TECH Apprentice
iTrader: (16)
 
Joined: Jul 2004
Posts: 305
Likes: 0
From: Boise, ID
Default

I e-mailed ya back. The car has been meticulously maintained. I never planned on selling it. It's in great shape and runs perfect, Honestly. Priorities change, and now I've got to pay for a wedding (my own!), so I need to pay off some debt first! My pride and joy has gotta go
Old Sep 26, 2007 | 07:32 PM
  #13  
ashade98's Avatar
Thread Starter
TECH Apprentice
iTrader: (16)
 
Joined: Jul 2004
Posts: 305
Likes: 0
From: Boise, ID
Default

Up Up!
Old Sep 27, 2007 | 09:54 PM
  #14  
ashade98's Avatar
Thread Starter
TECH Apprentice
iTrader: (16)
 
Joined: Jul 2004
Posts: 305
Likes: 0
From: Boise, ID
Default

Show a little love!
Old Sep 29, 2007 | 08:20 AM
  #15  
ashade98's Avatar
Thread Starter
TECH Apprentice
iTrader: (16)
 
Joined: Jul 2004
Posts: 305
Likes: 0
From: Boise, ID
Default

TTT for the weekend!
Old Sep 30, 2007 | 04:44 PM
  #16  
ashade98's Avatar
Thread Starter
TECH Apprentice
iTrader: (16)
 
Joined: Jul 2004
Posts: 305
Likes: 0
From: Boise, ID
Default

Look at me!
Old Oct 3, 2007 | 08:04 AM
  #17  
ashade98's Avatar
Thread Starter
TECH Apprentice
iTrader: (16)
 
Joined: Jul 2004
Posts: 305
Likes: 0
From: Boise, ID
Default

Lots of interest.... No takers yet!
Old Oct 5, 2007 | 07:47 AM
  #18  
ashade98's Avatar
Thread Starter
TECH Apprentice
iTrader: (16)
 
Joined: Jul 2004
Posts: 305
Likes: 0
From: Boise, ID
Default

Up Up Up
Old Oct 5, 2007 | 09:16 AM
  #19  
Cahill93Z28's Avatar
TECH Enthusiast
 
Joined: Jul 2004
Posts: 589
Likes: 6
From: Dallas, TX
Default

wow very nice.
Old Oct 5, 2007 | 02:04 PM
  #20  
Bump Stick's Avatar
Teching In
 
Joined: Sep 2007
Posts: 10
Likes: 0
From: Orlando, FL
Default

I love the rim choice (what i would put on too). just alittle high price wise for me, plus i'm not a big fan of the red strip on NBM (just a personal preference)... and I still have a few more months in Iraq too.



All times are GMT -5. The time now is 01:55 AM.