Gotta new project starting and didnt have enough time for this one.
I have a built 348 LS1 longblock I am wanting to get rid of. I bought this engine from tuff here on Tech. He went 9.43 on this motor with a big huff of nitrous. On motor he went 10.87. I think this motor has 8 second capabilities in a lightened car. I was planning on running a dual stage setup on it to achieve 8's but plans have changed. Info on the motor can be found here https://ls1tech.com/forums/lsx-parts-sale/417829-selling-my-346-forged-motor.html

Specs (from tuff):
.05 je forged pistons
eagle rods 6.125
custom ground cam owner gets spec ITS A BIG ONE!!!
comp r lifter with comp push rods
comp timing chain
jessel ss rockers
fully ported 5.7 heads with 2.02 1.57 valves with ferrea valve springs
arp head studs
underdrive pully
Motor was just freshed up mid season so its ready to go.
The things that are not inc is the valve covers,sensors,waterpump,oilpan

I only fired this engine up once while I had it, never saw the light of day though.
I would like to get what I paid for it, $3500 plus shipping.
I also have the direct port intake to go with it if interested. It was built by Nitro Dave's. Lots of man hours in making it look bling. I think its capable of 600hp per stage. Its a painted FAST 90mm, navy blue metallic, EGR hole has been filled, nitrous and FAST fuel rails have been polished and laser etched with PTM's website on it.
Pics can be found here:
http://www.nitrousoutlet.com/installs/install.asp?id=41
I paid over $3k for this intake setup, I would like to get $2500 for it. I also have Nitro Dave's stand alone fuel system for an F-Body I'll throw in for $250 (brand new)
If you're ready to go 9s or 8s, here is the setup for you...

 

My gosh that intake is sexy!
Is the stand alone the battery mount or the fuse(over by the abs) mount?

 

Its the battery mount system.
There's been some confusion on it- Im not selling the stand alone for $250 by itself. Thats only the price if you want it with the intake..

 

Naaa, you made it clear as possible man(throwing it in for $250).
This is very tempting, but I already have a plate kit I just bought from Dave.
Otherwise, I would be all over this.
That intake is the BOMB!

Hmmmm,
Would you considering selling the stand alone for $250+++?

 

Back to the top

 

I'm still in love with this intake and it would compliment my new engine combo PERFECTLY!
I would be interested in perhaps purchasing the intake and stand alone from you at the same time.
How far are you from DFW?
Do you have any pictures of the stand alone(is it brand new as well)?
Do you happen to have a progressive controller to go with this as well?

Get me some pictures so I can call Dave and see what else I would need vs. his current price to get the same work done on my FAST 90 using my noids.

I'm not here to BS you around, so let's cut the chase and get to negotiating!

 

I will post some pics of the stand alone. Yes, it is brand new, I only took it out of the box for mock up, but has never had any gas in it. I havent bought any controllers for it yet. It would be hard to replicate this intake for the price I am selling it with, even with some of your own parts. Painting, smoothing, polishing, laser etching are all big $$$

 

Ok, thank you for the response.
I will be watching this thread and waiting patiently.

As for the price...I'll do my research/consulting and compare it to your price, and then we will go from there.

 

bump for honest seller, sick motor too :-)

 

Here's the stand alone

 

Damn man, the engine is a sweet deal, I've been trying to figure out how to swing this seeing as I bought another truck a week ago. I've even put a few feelers out on my engine to try and sell it to buy this one.

 

Thank you very much for the pictures.
PM sent!

 

I will vouch for Steve,
He purchased this directport from us at dealer cost and spent right at 3,000. That did not even include the intake or fuel rails... Depending on where you buy the intake and fuel rails there is another grand..

We sell the dedicated he has posted for 710.00. To give you an idea what a killer deal this is. We can not manufacture this dedicated for 250.00

These are give away prices. If you are looking to go fast with the best quality and style jump on this... It will not last long.....

Dave

 

Justin,
Jump on this....... It will feed that 427 with style. Use the plate for a third stage.lol Or sell it. It will sell easy.
Dave

 

I'm trying to...that is if you would quit bumping it up for others to see how good of a deal it really is!


I'm wanting to get it from Steve this weekend if everything works out.
It should compliment that bottle nicely!

 

Very good deal! Dave is doing a L92 intake for us now!

 

Damn Dave, you dont know how much it kills me to get rid of this intake. I wish I could put it to use, but I'd rather see someone use it than it just sit on my shelf..
Is this what married life does to people?

 

Steve, hate to tell ya...it's just gonna sit on my self for a bit of time now, lol.
At least until Mike Kurtz checks out the 200r4 and upgrades a few parts for me and Circle D checks out the converter.


It was very nice meeting you and your wife last night.
Best of luck to you two in the future.
Enjoy Cali, it's a place I would love to go to sightsee.

I'll let you know when we get the car running correctly so you can come check it out on the stand alone, dual stage, fiddy shot!

 

Hate to see it go, buts its with its new owner now.. Im sad but glad because now it may actually see some action..

 

Steve,
I finnaly got that PCM to Moe to check... I should know something in the next day or so.

Yes marriage deffintly killed my pocket book.
Dave