LS1 Stock and Aftermarket Parts (MAKE OFFER)
LS1 Stock and Aftermarket Parts (MAKE OFFER) I ship Fedex from 95008, campbell, Ca. Pickups are also welcome
Make an offer / Best Offer; whatever even for the stuff that has prices
Cash by hand or Paypal works for me
Paypal: high10sws6@yahoo.com
find your shipping Cost
http://www.fedex.com/ratefinder/home?cc=US&language=en
-------------------------
Stock Parts:
Valve Covers - SOLD
Valve Springs w/locks and retainers
Valves
Rocker Arms w/bots and Guide plates
2 valley covers - $45 each shipped, also have knock sensors 1 set
Timing cover - $35 shipped
2 timing chains
2 cam sprockets
2000 ls1 Cam w/500in lift
00 Muffler with dual outlets
I - Pipe to muffler
Y - Pipe
Cats in perfect condition
2 Cranks
Rods w/ pistons
00 ls1 Oil Pump - $50
Stock Torque converter less then 200miles on it
cam sensor
crank sensor
Misc Bolts (heads, covers, etc)
Auto Shifter Assembly W/Sensors, T handle, Console Selector -$55
Auto Cable Linkage (NEW-Used) -$25
Auto Flexplate
Auto Bell Housing
Auto Cross Member
Auto Pedal Assembly
~name it i probably have it~
I have to engines in pieces gathering dust
853 2000 and 241 2001
---------------
Aftermarket:
4L60E Transmission w/HD Bands and shift kit, new front pump (might need a new front shaft) spent $3400
Had less then 350 miles on it
Yank PRO THRUSTER 4400 4L60E/4L65E
245mm, Stall speed 4400, Posi Lock-Up Clutch w/Kevlar Linings, lightweight billet cover, 2.5 STR
50miles are on it
it's never been stalled
Correction it's not the PT4400 but-
SUPER STOCK 4000 4L60E/4L65E
245mm very high stall torque ratio. 4000 stall, 2.6 STR
paid $825.00
50miles are on it
it's never been stalled
Manley Nextek Valve Springs - good for 600in lift
also have; but not sure if i'm selling yet -----
Vortech S-Trim
High Flow Blow-Off Valve
----------
I can take pictures for anyone needing them.
Make an offer / Best Offer; whatever even for the stuff that has prices
Cash by hand or Paypal works for me
Paypal: high10sws6@yahoo.com
find your shipping Cost
http://www.fedex.com/ratefinder/home?cc=US&language=en
-------------------------
Stock Parts:
Valve Covers - SOLD
Valve Springs w/locks and retainers
Valves
Rocker Arms w/bots and Guide plates
2 valley covers - $45 each shipped, also have knock sensors 1 set
Timing cover - $35 shipped
2 timing chains
2 cam sprockets
2000 ls1 Cam w/500in lift
00 Muffler with dual outlets
I - Pipe to muffler
Y - Pipe
Cats in perfect condition
2 Cranks
Rods w/ pistons
00 ls1 Oil Pump - $50
Stock Torque converter less then 200miles on it
cam sensor
crank sensor
Misc Bolts (heads, covers, etc)
Auto Shifter Assembly W/Sensors, T handle, Console Selector -$55
Auto Cable Linkage (NEW-Used) -$25
Auto Flexplate
Auto Bell Housing
Auto Cross Member
Auto Pedal Assembly
~name it i probably have it~
I have to engines in pieces gathering dust
853 2000 and 241 2001
---------------
Aftermarket:
4L60E Transmission w/HD Bands and shift kit, new front pump (might need a new front shaft) spent $3400
Had less then 350 miles on it
Yank PRO THRUSTER 4400 4L60E/4L65E
245mm, Stall speed 4400, Posi Lock-Up Clutch w/Kevlar Linings, lightweight billet cover, 2.5 STR
50miles are on it
it's never been stalled
Correction it's not the PT4400 but-
SUPER STOCK 4000 4L60E/4L65E
245mm very high stall torque ratio. 4000 stall, 2.6 STR
paid $825.00
50miles are on it
it's never been stalled
Manley Nextek Valve Springs - good for 600in lift
also have; but not sure if i'm selling yet -----
Vortech S-Trim
High Flow Blow-Off Valve
----------
I can take pictures for anyone needing them.
Last edited by DVCrazyCamTAWs6; Nov 7, 2007 at 04:38 PM.
i'll try to put prices up thanks
------
mg98ta
i'll say $80 that includes the linkage, the shifter assembly, T handle, and console gear selector unit with all sensors
------
mg98ta
i'll say $80 that includes the linkage, the shifter assembly, T handle, and console gear selector unit with all sensors
Last edited by DVCrazyCamTAWs6; Oct 25, 2007 at 11:28 AM.
If anything just put that all parts are $100 or best offer, with emphasis being on the OR BEST OFFER.
I wanted to add that I had a 4400 stall with 2.5str on my last car. STOCK LS1 with a 4400 stall. That is the absolute best stall. Drove fine after I got used to it and it left many in the dust. TTT for ya
I wanted to add that I had a 4400 stall with 2.5str on my last car. STOCK LS1 with a 4400 stall. That is the absolute best stall. Drove fine after I got used to it and it left many in the dust. TTT for ya
Trending Topics
If anything just put that all parts are $100 or best offer, with emphasis being on the OR BEST OFFER.
I wanted to add that I had a 4400 stall with 2.5str on my last car. STOCK LS1 with a 4400 stall. That is the absolute best stall. Drove fine after I got used to it and it left many in the dust. TTT for ya
I wanted to add that I had a 4400 stall with 2.5str on my last car. STOCK LS1 with a 4400 stall. That is the absolute best stall. Drove fine after I got used to it and it left many in the dust. TTT for ya
Good Idea.
Yeah this stall was kick *** for drive ability never got to actually use it though i went to a t56 instead.
i'll take $500 for it its practically new
there used; i didn't have them on long, because i went to and extra set that i had that are softer(ls6 springs) i was basically over springing my car when it wasn't required to be.
part number i believe is 221423-16
part number i believe is 221423-16
