I traded my hood to Mike96z for these heads and a cam. I have decided to keep my heads so these have to go.

Ported and Polished Heads w/ Crane Cams 10308 Valve Springs - (LT1 castings, flow a little better than LT4 heads, fully ported and polished and gasket matched, fresh valve job, cleaned up everywhere, real nice and come with Crane Cams 10308 Valve Springs, 374 castings, thats the best casting and flow the best when ported

$300 obo

If your intrested give me a call at 214 499 7718. Leave a message if i dont answer and i will give you a call back.

Located in Flower Mound 75028

 

damn, if you were only closer

 

Do you know anyone heading up to the DFW area anytime soon?

 

how much power should they make with full bolt ons and a matching cam?

 

I am not really sure on that. PM mike96z and ask what kind of power his car was making cause i have never had these on my car to know.

 

TTT Would really like these gone.

 

very good heads, well worth 300, the springs and work would cost you much more. They flow really well, the cam I had on these things was the biggest off the shelf cam i could find for my 388, .579/.584 CC468 cam.

 

TTT Doesnt hurt to make an offer.

 

just 300 rwhp?

 

they were hogged out but have stock valves in them with springs...springs are 105 from jegs

 

No he meant that they are worth the $300. I believe his car was suppose to be making 480rwhp with the following cam. You will have to ask him that though. http://store.summitracing.com/partde...8&autoview=sku

 

Ttt..

 

nope don't know anyone heading up that way anytime soone at all...those heads seem like they would help out my cam ALOT. since it's a lil smaller than Mike's cam he was using...fk!!...

 

i wish i lived in texas...free bump for ya

 

post up pics of them

 

Here are some pictures. These are the best i could get.






[/QUOTE]

 

you might want to pm That_Guy he is slowly building up his lt1 im sure hell be intrested....should bolt right up wouldnt it?

 

They should if he has an lt1 car.

 

Yeah he does....last i heard he was barlely modding it...but for 300 i think hell get the best out of the 300.... i think he had bough full exhaust and intake.....but better then what he had....bone stock.... whats the mileage on them?

 

I believe mike said there was only 10,000 miles on them since all the work was done on them when he took them off his motor. I sent that_guy a pm.