New Weiand Street Warrior at SEMA
10-31-2007, 11:45 AM
#1
10 Second Club
Thread Starter
iTrader: (15)
Join Date: May 2004
Location: Minnesota
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
New Weiand Street Warrior at SEMA Looks like serious competition for Fast........
I am sold on one....
The company that made it is called Starr Products out of Aussie. Nice guys...
I am sold on one....The company that made it is called Starr Products out of Aussie. Nice guys...
10-31-2007, 12:23 PM
#5
10 Second Club
Thread Starter
iTrader: (15)
Join Date: May 2004
Location: Minnesota
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
They have an adapter plate.. So you can run a 78 and take that off when you want to go 90mm.. It's hanging above the intake in the first picture you can kinda see the bottom.
No you don't want to mess with the ports, there computer designed and they don't want the airflow turbulant. BUT there is some room on the port so you can port match to the head.
No you don't want to mess with the ports, there computer designed and they don't want the airflow turbulant. BUT there is some room on the port so you can port match to the head.
Trending Topics
10-31-2007, 12:33 PM
#8
10 Second Club
Thread Starter
iTrader: (15)
Join Date: May 2004
Location: Minnesota
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
Taking 32hp and 31 foot lbs over the LS6 and 15 over FAST. It also was said that it beat the Fast intake 15lbs through the whole RPM range just not on the top end like Fast.
Yes 90mm, then you can buy the plate for 78mm
Yes 90mm, then you can buy the plate for 78mm
10-31-2007, 12:45 PM
#12
No, the Aussie actually told us the LS7 version is in development right now and should be finished by spring. The LS1/LS2 L92 version is all ready and will be going into production January. Nevermind Speedo's time frame on this, after all the 40 ounce Smirnoffs he wouldn't remember!
Traver
Traver 
10-31-2007, 01:45 PM
#15
TECH Regular
iTrader: (10)
Join Date: Jan 2004
Location: Green Bay, WI
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
So am I hearing this correct. They are coming out with an intake that will replace the L76 intake since it bolts to the L92 heads? And another intake that is for the LS1/LS2?
10-31-2007, 07:13 PM
#18
FormerVendor
iTrader: (18)
Join Date: May 2007
Location: Florida
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
I heard of something new coming out but this is the first pictures I have seen. Damn send me one and I will put it on tonight and test it on the dyno before I go home.
10-31-2007, 07:58 PM
#19
11 Second Club
iTrader: (4)
Join Date: Nov 2002
Location: SoCal
Posts: 897
Likes: 0
Received 0 Likes
on
0 Posts
Does it have a "clip" to hold the MAP sensor like the LS6 does? Thats my biggest gripe about the FAST, well that and even ported they won't keep up with a big cube motor.
10-31-2007, 08:06 PM
#20
TECH Junkie
iTrader: (7)
Join Date: Aug 2004
Location: Prairie de Femme, LA
Posts: 3,809
Likes: 0
Received 0 Likes
on
0 Posts
damn, thats a pretty intake. hope the production ones are smooth like that onem and hopefully stuff like the map holder is resolved. for the cost of a FAST, it shouldn't have the issues it does.
it even looks to have holes for both LS1 and LS2 fuel rails
it even looks to have holes for both LS1 and LS2 fuel rails
