I am cleaning out my garage. Here is what I have.

1. LS1 Lifter Keepers-50.00
NO PICTURE YET

2. LS1 Valley Cover-35.00


3. Cam Plate-25.00
[URL=http://imageshack.us][/

4. LS1 Stock bore Diamond pistons with ARP rod bolts and Stock rods- One rod is broke and two pistons need replaced.- 100.00



5. Stock LS1 throttle body Busted TPS sensor- 50.00
[URL=http://imageshack.us][/

6. Used 456 Gears for Ford 9inch- 75.00
NO PICTURE YET

7. Used 430 Gears for 12 bolt- 75.00
NO PICTURE YET

8. LS1 air condition compressor bracket- 35.00




All parts are plus shipping. I will try to get pics up asap. I will be adding to the list as I can.
Dave

 

interested in the pushrods... Are these new or used?? I also assume these are the one piece ones...

 

They are used.
They are these.
http://www.thunderracing.com/catalog...vid=3&pcid=106

Dave

 

Hey guys I used the alternator bracket on my car. It used a belt for just the crank and alternator. No water pump, power steering, or AC.

I had a race only water pump.
Dave

 

DAVE PM me a price shipped on that alternator bracket and the harness and PCM shipped to 53188 please

Thanks

JEFF

 

pm sent

 

Pms sent and responded to
Dave

 

Wouldnt happen to have an LS6 cam laying around would you?

 

No I sure dont.
Sorry

 

what do those diamond pistons run each?

Also...how many miles? Juts a good sand blastings and rings they should be like new correct?

 

I am not sure. You can call Diamond and see what they cost. I checked one year ago. You have to buy them in a set of 4 and a set of 4 was going to cost me 400.00

You will need this number 18466. It is the custom build number.

Two of these need to be replaced. However ARP rod bolts are 80.00
Dave

 

PCM and Harness, Front and Rear cover are sold.

 

t t t

 

Thanks Mark

 

Hows 65 shipped for the pushrods? if so I'll take em!!!
Roughly how many miles were on these with which size cam?

 

Sorry the pushrods are sold already.

I just updated the list to what is sold.
Thanks
Dave

 

To the top

 

You wouldn't happen to have the windage tray, oil pan, pick up, and/or dip stick.

 

I have a oil dipstick..
Dave

 

It's a start, I'll send you a PM