FS Dart 225 heads NEVER INSTALLED!!!
Thread Starter
TECH Apprentice
iTrader: (3)
Joined: Nov 2005
Posts: 387
Likes: 1
From: Tinker till it blows, then back it off a notch, maybe!!
I have a set of Dart 225's still in boxes and bags...never installed
Asking $1375 OBO
I also have another set, but they have been cleaned up (casting flash removed) and have dual springs good to 7500 rpm's. Chanbrs are polished and cc'd to 63cc's
Make an offer over $1400
Thanks
Asking $1375 OBO
I also have another set, but they have been cleaned up (casting flash removed) and have dual springs good to 7500 rpm's. Chanbrs are polished and cc'd to 63cc's
Make an offer over $1400
Thanks
Thread Starter
TECH Apprentice
iTrader: (3)
Joined: Nov 2005
Posts: 387
Likes: 1
From: Tinker till it blows, then back it off a notch, maybe!!
both are assembled with valves and springs.
The out of the box set has beehives...single 918's , I believe
Both have 2.05 intakes and 1.6 exhausts.
They are meant for a big bore, but many have used them on small bore with FI....some vette guys have made 700 to 800 rwhp on 346 with turbos.
The out of the box set has beehives...single 918's , I believe
Both have 2.05 intakes and 1.6 exhausts.
They are meant for a big bore, but many have used them on small bore with FI....some vette guys have made 700 to 800 rwhp on 346 with turbos.
Thread Starter
TECH Apprentice
iTrader: (3)
Joined: Nov 2005
Posts: 387
Likes: 1
From: Tinker till it blows, then back it off a notch, maybe!!

