gauging interrest on race car part-out
#1
7 Second Club
Thread Starter
iTrader: (42)
Join Date: Jun 2004
Location: paducah, ky
Posts: 4,558
Likes: 0
Received 0 Likes
on
0 Posts
gauging interrest on race car part-out
[IMGhttp://i61.photobucket.com/albums/h42/ty_ty13/Picture021.jpg[/IMG]
PENDING***brand new never used BS3 with DAI for ls1- 2000 shipped
[SOLD***procharger d1sc head unit and ATI bracket with 3.4 blower pulley and 7.65 crank pulley- 1900 shipped
SOLD***Procharger fan shroud and fan 150$ shipped
SOLD***inlet hat from a d1sc with one small filter on the inlet 100$ shipped
SOLD***a larger than stock cone filter for the platic inlet hat 30$ shipped
front mout piping with mondo bypass- 400$ shipped
i will sell the mondo by it self for 175$ shipped
and the piping for 300$ shipped
4'' aluminum elbow for d1sc 25$ shipped
OBX FMIC (34x12x3) 175$ shipped
SOLD***2bar map sensor- 30$ shipped
Silicone elbow 3.5 - 4'' (these are expensive bastards) - 45$ shipped
vacuum port splice with nipples 30$ shipped
SOLD***
used tensioner with pulley that has extra tall walls (kept me from throwing belts)
20$ shipped
SOLD***408 shortblock (weiseco -32cc pistons with extra flycut, eagle crank, callies compstar rods, piston is about .020 in the hole and comes out to about 8.0:1 CR with a 72cc head) with 1/2 head studs, ATI damper(no AC, underdrive) double roller timing chain, stock oil pump, all covers, and stock oil pan only used from feb. till end of oct.
-4000
SOLD*** gmpp single plane intake (already drilled for injectors and has fuel rails on it) -325 shipped
SOLD*** Aarons elbow to fit gmpp intake and holley TB also has 3 vaucuum fittings. 75$ shipped
SOLD*** 90mm holley TB with welded up IAC motor- 200$ shipped
SOLD*** would sell the intake, elbow and 90mm TB together for- 475 shipped
SOLD***Motron 60lb injectors- 300 shipped
single plane intake gaskets- 35$ shipped
SOLD***Magna fuel pump 4303- supports 2000hp (so it states on nastyperformance webite)- 450 shipped
SOLD***holley fuel pressure regulator for boost 1:1
125$ shipped
SOLD***mezeir electric water pump black with 160 stat (less than 500 miles!!) - 450 shipped
I have more pictures if needed of headers
1 3/4'' SLP headers with welded on extensions because of no cats- 300$ shipped
Factory starter 40$ shipped
Factory alternator with the wires shown- 45$ shipped
th350 with probrake built by ATI said to easily hold 850hp in a 3300lb car. i spent 1500 just on internal parts to beef it up... new hub, glide shaft, upped line pressure.... this comes with a ATI converter that stalls about 5k rpm behind a 620hp motor. 800$ + shipping
SOLD***TCI flywheel thats sfi approved- 175 shipped
if anybody buys more than one thing i'll make negotiations.
I will not ship anything if paid via paypal until the funds are in my bank account
PENDING***brand new never used BS3 with DAI for ls1- 2000 shipped
[SOLD***procharger d1sc head unit and ATI bracket with 3.4 blower pulley and 7.65 crank pulley- 1900 shipped
SOLD***Procharger fan shroud and fan 150$ shipped
SOLD***inlet hat from a d1sc with one small filter on the inlet 100$ shipped
SOLD***a larger than stock cone filter for the platic inlet hat 30$ shipped
front mout piping with mondo bypass- 400$ shipped
i will sell the mondo by it self for 175$ shipped
and the piping for 300$ shipped
4'' aluminum elbow for d1sc 25$ shipped
OBX FMIC (34x12x3) 175$ shipped
SOLD***2bar map sensor- 30$ shipped
Silicone elbow 3.5 - 4'' (these are expensive bastards) - 45$ shipped
vacuum port splice with nipples 30$ shipped
SOLD***
used tensioner with pulley that has extra tall walls (kept me from throwing belts)
20$ shipped
SOLD***408 shortblock (weiseco -32cc pistons with extra flycut, eagle crank, callies compstar rods, piston is about .020 in the hole and comes out to about 8.0:1 CR with a 72cc head) with 1/2 head studs, ATI damper(no AC, underdrive) double roller timing chain, stock oil pump, all covers, and stock oil pan only used from feb. till end of oct.
-4000
SOLD*** gmpp single plane intake (already drilled for injectors and has fuel rails on it) -325 shipped
SOLD*** Aarons elbow to fit gmpp intake and holley TB also has 3 vaucuum fittings. 75$ shipped
SOLD*** 90mm holley TB with welded up IAC motor- 200$ shipped
SOLD*** would sell the intake, elbow and 90mm TB together for- 475 shipped
SOLD***Motron 60lb injectors- 300 shipped
single plane intake gaskets- 35$ shipped
SOLD***Magna fuel pump 4303- supports 2000hp (so it states on nastyperformance webite)- 450 shipped
SOLD***holley fuel pressure regulator for boost 1:1
125$ shipped
SOLD***mezeir electric water pump black with 160 stat (less than 500 miles!!) - 450 shipped
I have more pictures if needed of headers
1 3/4'' SLP headers with welded on extensions because of no cats- 300$ shipped
Factory starter 40$ shipped
Factory alternator with the wires shown- 45$ shipped
th350 with probrake built by ATI said to easily hold 850hp in a 3300lb car. i spent 1500 just on internal parts to beef it up... new hub, glide shaft, upped line pressure.... this comes with a ATI converter that stalls about 5k rpm behind a 620hp motor. 800$ + shipping
SOLD***TCI flywheel thats sfi approved- 175 shipped
if anybody buys more than one thing i'll make negotiations.
I will not ship anything if paid via paypal until the funds are in my bank account
Last edited by ty_ty13; 12-01-2007 at 02:36 PM. Reason: added products