Looking to re-sell a set of heads I bought on this site under the following description and look to be exactly as described by the seller below in red. I looked at all of the valves and don't see any bent, but I'm not saying that there isn't a bent valve. The machine shop will be the judge of that and I would assume one is bad.
"...set has been mildly ported by a professional and has Ferrea 2.02 and 1.57 valves with bronze valve guides. Been milled .010, but has one maybe slightly bent valve. Valve itself doesn't appear bent but you can tell it hit the piston just a very small amount and left a very small nick. Not much damage. Won't cost much to repair." $250.00 shipped for heads with valve covers.

Set of new comp 915's that I bought with the heads above. (No stripe on these) $50.00 shipped

Stock valve springs, lifters, and pushrods from a 2000 LS1 $40.00 shipped

Ported MAF from a 2001 LS1(3 pin) $30.00 shipped SOLD


Stock 6 speed shifter stick (stick only - no ****) $12.00 shipped

Rear red tail light filler panel with SS and bowtie emblems. Has some light scratches but could be polished up and put on a red car as is and look pretty decent. I had bought it to do a blackout and changed my mind. $70.00 shipped.

 

 

 

can you send me some picks on the bmr LCA and you, would like to buy them.

 

 

Ti retainers, springs, LCA brackets, and coils are sold.

 

Have you sold the heads

 

No. I deleted the sold items.

 

Up once more

 

Another look

 

Reduced price on heads.

 

MAF is sold