Hal QA1/SA, Springs, and more
Thread Starter
TECH Apprentice
iTrader: (12)
Joined: May 2006
Posts: 380
Likes: 0
From: Lafayette, LA
Hal QA1/SA, Springs, and more I have a set of QA1 single adjustable with about 1000mi on them. The fronts are coilover type and I have a set of wrenches and a thrust bearing kit to go as well.
NO track time.
The springs are the 300lb QA1 front springs and BMR rear springs.
Not much to say here that hasn't been said. Let me know if you have any questions.
600 + shipping for the whole set
OR
350 for the whole front setup
250 for the rear shocks and springs
you pay shipping!
paid
360 fronts
120 springs
20 for that yellow wrench (throwing that in cause it's junk)
40 for the two big wrenches (correct wrenches)
45 for the thrust bearing kit
300 for the rear shocks
125 for the BMR springs
right at about 1k
NO track time.
The springs are the 300lb QA1 front springs and BMR rear springs.
Not much to say here that hasn't been said. Let me know if you have any questions.
600 + shipping for the whole set
OR
350 for the whole front setup
250 for the rear shocks and springs
you pay shipping!
paid
360 fronts
120 springs
20 for that yellow wrench (throwing that in cause it's junk)
40 for the two big wrenches (correct wrenches)
45 for the thrust bearing kit
300 for the rear shocks
125 for the BMR springs
right at about 1k
Last edited by sapper_daddy; Dec 31, 2007 at 08:38 AM.
Thread Starter
TECH Apprentice
iTrader: (12)
Joined: May 2006
Posts: 380
Likes: 0
From: Lafayette, LA
These really weren't suited for street driving. I can't see using them when there are better street suspensions out there. To each his own though. I gave it a shot because I wanted the adjustability.
Last edited by sapper_daddy; Dec 25, 2007 at 12:26 PM.
Trending Topics
most people have just the rear done and want to do the front or have the front done and want to get the rear done Thread Starter
TECH Apprentice
iTrader: (12)
Joined: May 2006
Posts: 380
Likes: 0
From: Lafayette, LA
damn Christmas killed me 