heads intake nx et streets and stock stuff
Thread Starter
Joined: Oct 2004
Posts: 273
Likes: 9
From: colorado springs colorado
(edit) nx incon y headers rims added stuff last page ls6 intake 325 shipped SOLD!!!!!!!!
comp custom blower cam, specs tonight. 250 shipped
aeromotive a1000 the big one with fuel computer 375 shipped
02 ss throttle body 60 shipped sold!!!!!!!!
02 ss stock complete heads with rockers and pushrods 300 shipped
02 ss coilpacks with brackets 160 shipped edit they have mds wires on them
31 x 19 griffin custom radiator. 2/1/2 in core 300 shipped
02 ws6 heads tooken off at about 20k then p n p with 2.02 manley severe duty stainless valves, manley nextek double valve springs retainers and locks. clean ready to go never installed, porting by this guy http://www.youtube.com/watch?v=t38Vl...eature=related 700 obo shipped SOLD!!!!!!!!!!
stock valve covers make offer or goes with either set of heads SOLD !!!!!!!shipping soon
stock crank out of low mileage 03 6.0 125 shipped
02 ws6 fog lights 50 shipped
02 ws6 front 5mph bumper, make offer
26*11.50*16 et streets 6 passes minimal driving 180 pus shippingSOLD!!!!!
set of rear aluminum wheels 16 in by well hell i d have measure but they put the above et streets just barely under the car. no rubbing no grinding on a f body and will fit under c5 with grinding. they are aluminum and crazy light. 250 shipped
nitrous kit nitrous express nozzle system maf SOLD!!!!!
2 solenoids
tons of extras ill get it together tonight so i got an inventory but i wanted to put in in here so i didnt violate rules with two ads.
stock ws6 suspension as well and i think i have some eldebrock headers. an ls1 block and ls6 block two more stock cranks and all the front accessories, a conversion u joint. 6.0 truck oil pan and internals 02 ss camaro oil pan SOLD!!!! oh and stock fuel rails(SOLD!!!!!!!) and inectors
pics available as i borrow digi cam tonight and tomorrow
comp custom blower cam, specs tonight. 250 shipped
aeromotive a1000 the big one with fuel computer 375 shipped
02 ss throttle body 60 shipped sold!!!!!!!!
02 ss stock complete heads with rockers and pushrods 300 shipped
02 ss coilpacks with brackets 160 shipped edit they have mds wires on them
31 x 19 griffin custom radiator. 2/1/2 in core 300 shipped
02 ws6 heads tooken off at about 20k then p n p with 2.02 manley severe duty stainless valves, manley nextek double valve springs retainers and locks. clean ready to go never installed, porting by this guy http://www.youtube.com/watch?v=t38Vl...eature=related 700 obo shipped SOLD!!!!!!!!!!
stock valve covers make offer or goes with either set of heads SOLD !!!!!!!shipping soon
stock crank out of low mileage 03 6.0 125 shipped
02 ws6 fog lights 50 shipped
02 ws6 front 5mph bumper, make offer
26*11.50*16 et streets 6 passes minimal driving 180 pus shippingSOLD!!!!!
set of rear aluminum wheels 16 in by well hell i d have measure but they put the above et streets just barely under the car. no rubbing no grinding on a f body and will fit under c5 with grinding. they are aluminum and crazy light. 250 shipped
nitrous kit nitrous express nozzle system maf SOLD!!!!!
2 solenoids
tons of extras ill get it together tonight so i got an inventory but i wanted to put in in here so i didnt violate rules with two ads.
stock ws6 suspension as well and i think i have some eldebrock headers. an ls1 block and ls6 block two more stock cranks and all the front accessories, a conversion u joint. 6.0 truck oil pan and internals 02 ss camaro oil pan SOLD!!!! oh and stock fuel rails(SOLD!!!!!!!) and inectors
pics available as i borrow digi cam tonight and tomorrow
Last edited by t-1; Feb 7, 2008 at 12:46 PM.
Trending Topics
Teching In
Joined: Nov 2007
Posts: 18
Likes: 0
From: monroe city,missouri
Thread Starter
Joined: Oct 2004
Posts: 273
Likes: 9
From: colorado springs colorado
back spacing and width will be verified tonight around 6pm mountain time when i get off work. i will take pics of the intakes tonight as well. check back cause ill just post them up here i hate sending emails lol
ive got several questions about the kit. for 500 shipped. you would the nx maf housing with three sets of jets the elbow fittings, the lines to the solenoids, the solenoids with about 6 in of the orginal pig tail on them in good working condition and they will be tested before leaving my house and the brackets for them to. nothing custom just the good old ones from the kits. a wot switch and a very used wot switch bracket. its bent to work fine but we all know how ugly that looks sometimes. the line to the bottle and a short fuel line for the "in" side of the fuel solenoid. if you have aftermarket fuel rails all throw in the fittings to get fuel tapped in. i would also through in a digital window switch. and one bottle. an activation switch and im not sure on the brackets. ill have too look i never used them cause i just hid under the speaker wrapped in blankets. i have an extra bottle for 25 bucks extra if you are the buyer of the kit. also i believe i have a purge kit i would throw in cheap if i still have it. i keep everything at my storage unit so i would have to look. 20 extra for it if you buy the kit. pics again will be up tonight cause i have to borrow a camera cause i am poor lol
ive got several questions about the kit. for 500 shipped. you would the nx maf housing with three sets of jets the elbow fittings, the lines to the solenoids, the solenoids with about 6 in of the orginal pig tail on them in good working condition and they will be tested before leaving my house and the brackets for them to. nothing custom just the good old ones from the kits. a wot switch and a very used wot switch bracket. its bent to work fine but we all know how ugly that looks sometimes. the line to the bottle and a short fuel line for the "in" side of the fuel solenoid. if you have aftermarket fuel rails all throw in the fittings to get fuel tapped in. i would also through in a digital window switch. and one bottle. an activation switch and im not sure on the brackets. ill have too look i never used them cause i just hid under the speaker wrapped in blankets. i have an extra bottle for 25 bucks extra if you are the buyer of the kit. also i believe i have a purge kit i would throw in cheap if i still have it. i keep everything at my storage unit so i would have to look. 20 extra for it if you buy the kit. pics again will be up tonight cause i have to borrow a camera cause i am poor lol
Thread Starter
Joined: Oct 2004
Posts: 273
Likes: 9
From: colorado springs colorado
theese are the pics form when i bought theese. this exactly how they still are. i just decided to go 408 cause of a great deal i made. but kp and several others have shown how bad *** a 347 can be
