Corvette ATI Superdampner 10% underdrive $350 shipped

Star Vacuum Pump(579 new)
- with billet 28t pulley (85 new)
- With mounting bracket (80 new)
$550 shipped

Canton Accusump system
Complete with hardware/fittings for block
electric valve kit($115)
Comes with 2 AN fittings
New and unused
$360 shipped

3 Series 3 Rib Case
$350

Short Stub axle
$100

Spider gear for long axle
$100

3" Corvette race exhaust - "dumps"
Compatible with LG and AR headers Pipes connect to X pipe and dump right before the rear axle, will bolt to factory hangers. Uses Bullet Mufflers
$125

Brand new Dyna Battery – 12 volt Lightweight battery ~10lbs
Dyna Batt does not have a cold cranking amp rating like other batteries, but has been tested to crank engines with compression ratios as high as 15:1. The reserve capacity of the Dyna Batt is 16 Amp Hours. The Dyna-Batt is completely dry cell and can withstand the rigors of high performance and racing enviornments. It is built with corrosion resistant terminals and is truly maintenance free. The Dyna Batt has an excellent storage life and
$70 shipped

LS7 Clutch + Flywheel - Balanced $275 shipped ~4500 miles
- Owner switch to a Ram dual disc and wishes he still had the LS7

LS1 Blocks for mockup or can be sleeved
$75

LS1 Crank have not been turned low mileage
$150

Black Ported MAF ends
$40

Eagle Rods 6.125" LS1 - Big end honed nice and round for stock sized bearings
$250

Stock Corvette front bumper
$50

Stock Corvette Hood
$50

Corvette && Z06 Take off manifolds
$50 set

99-04 Mustang GT rear spoiler
$50

Craftsman 18" Professional Metal/wood Bandsaw #22450
Paid 1299 - $800

Vertical/horizontal bandsaw same as pic.
$75


Aerospace 4 piston brakes for 99-04 mustang
Front and Rear
CNC'd Aluminum 4 piston calipers
Aluminum Hats - 2 piece rotor design
Brand new - used for mockup
Complete with mounting hardware
4 - rotors(2 fronts/2 rear)
4 - Calipers(2 fronts/2 rear)
Pads included
Lightweight and great stopping power
$1200 shipped



I've got a set of Autofab Coilovers. The kit is basically brand new used for mockup. I moved my coilovers inside the frame rails and don't have as much height as the factory location so I need shorter shocks and hence sale. The shocks have never been ran. The kit includes
94+ Mustangs
2 - QA1 adjustable shocks complete ready to bolt on.
2 upper mounts
2 lower mounts
2 10 x 175 springs

The shocks are in brand new condition while the springs are in new condition except for a couple of chips in the powdercoat from the spring jaws had made a mark. Looking for $425 shipped OBO.


Please send me an email if your interested. phillip_eclipse@hotmail.com items can ship this week.

 

pm sent on eagle rods

 

PM returned

 

Is the Vacuum pump belt driven or electric?

 

payment sent for rods...

 

i would assume belt driven since it comes with the pulley

 

Pm sent on the Accusump

 

Ok, So far....
1 of the 5 Block are sold
Dyna Battery is sold
1 of the 4 crank are sold
Eagle rods are sold
LS7 Clutch is sold

Have deals working on BUT NOT SOLD:
Aerospace brakes front and rear
Accusump system
Star Vacuum Pump
ATI Super Damper

If you guys are interested you should move, this is on 5 boards and getting almost 20 emails an hour. I've got a handful of guys that are ready to send money but the items are sold. Sorry guys!

For all the guys interested in the bumper cover and the hood, my ship from Zip is 20677, you work out the shipping details and I'll handle getting it to the place to ship and working out some type of boxing.

 

Returned PM on accusump, I've got a handful of guys interested but no money in paypal yet.

 

T T T

 

Payment sent on Accusump, fittings, and, vacuum pump
Thanks Phil!

 

I've got 2 brand new LS2 timing chains I purchased to try and setup a double roller LS2 chain setup but it won't work.

They are brand new LS2 chains
Thicker design that everyone uses now
$30.00 shipped/paypal'd each
"Phillip_eclipse@hotmail.com"