408 solid roller motor for sale
#1
8 SEC SLOPPY SHOT!!!
Thread Starter
iTrader: (15)
Join Date: Oct 2002
Location: lombard,IL
Posts: 1,862
Likes: 0
Received 0 Likes
on
0 Posts
408 solid roller motor for sale
Well i was going to keep my 408 but since i bought ET performance LSX house motor i really don't need my 408 sitting in the corner of my garage.Im going to price this motor to sell!!!
The motor has the following parts and intake will be included also.
Iron block arp main studs with LME custom oiling system with petersen external oil pressure regulator and moroso oil pan
Lunati crank
Lunati pro billet rods
JE flat top pistons with stainless ring package, Gapping setup for nitrous
ET 255 heads with upgraded solid roller spring package 53''cc chambers
smith bros restricted pushrods
Jessel rockers
L19 headstuds
Custom comp cam grind done by ET, specs i will have to dig up but it's at the 800 lift range and on a 115 lsa.This is a NOS grind cam that i never was able to see what it had in it.
ati balancer
Custom ET cast intake pics included.Fuel rails are inc with intake
Sheetmetal valve covers
Block is o ringed reciver grooved with copper gaskets.
I will take 7500.00 for the complete package this is a killer price.The work i had done last was the cam, intake, heads worked for bigger springs cost me 3500.00 and was never able to see what it had in it.This motor should go 8.40 in a 3300 pound car on the bottle of course.Nitrous kit not included
The motor has the following parts and intake will be included also.
Iron block arp main studs with LME custom oiling system with petersen external oil pressure regulator and moroso oil pan
Lunati crank
Lunati pro billet rods
JE flat top pistons with stainless ring package, Gapping setup for nitrous
ET 255 heads with upgraded solid roller spring package 53''cc chambers
smith bros restricted pushrods
Jessel rockers
L19 headstuds
Custom comp cam grind done by ET, specs i will have to dig up but it's at the 800 lift range and on a 115 lsa.This is a NOS grind cam that i never was able to see what it had in it.
ati balancer
Custom ET cast intake pics included.Fuel rails are inc with intake
Sheetmetal valve covers
Block is o ringed reciver grooved with copper gaskets.
I will take 7500.00 for the complete package this is a killer price.The work i had done last was the cam, intake, heads worked for bigger springs cost me 3500.00 and was never able to see what it had in it.This motor should go 8.40 in a 3300 pound car on the bottle of course.Nitrous kit not included
Trending Topics
#9
8 SEC SLOPPY SHOT!!!
Thread Starter
iTrader: (15)
Join Date: Oct 2002
Location: lombard,IL
Posts: 1,862
Likes: 0
Received 0 Likes
on
0 Posts
I also have a smaller cam if someone is looking for the weekend warrior setup.The specs on my small cam that would be good for the street.
Intake 735 Exhaust 715
duration Intake 278 Exhaust 286
LSA 112
Intake 735 Exhaust 715
duration Intake 278 Exhaust 286
LSA 112
#13
8 SEC SLOPPY SHOT!!!
Thread Starter
iTrader: (15)
Join Date: Oct 2002
Location: lombard,IL
Posts: 1,862
Likes: 0
Received 0 Likes
on
0 Posts
I would need offer on the short block to see if its worth it to me.The intake is custom matched to my et 255 heads and would not work on any other setup.Unless you spent time to make it work but i would say the intake will stay with the heads.