PST Driveshaft, SLP Lid and Bellows, Plug wires F/S
PST Driveshaft, SLP Lid and Bellows, Plug wires F/S Guys,
I have a PST 3 1/2" Aluminum driveshaft for sale. It is barely used and has approximately 2000 miles on it. No track passes or anything like that. Basically new. I Paid $400 and I will sale for $350 shipped. See description below. **Sold to CW00BLACKTA**
Will support 1000 HP! Lifetime Guarantee!
Street - Strip Aluminum Driveshafts. 6061-T6 Dom tubing gives the most concentric Aluminum Driveshaft available. High strength aluminum tube yokes are Mig welded with less than 10 thousands total run out. The aluminum shaft is balance to less than 1/4 oz to assure vibration free operation.
Cryo treated performance dynamic solid 1350 U-Joints *
Cryo treated transmssion slip yoke
Heavy duty aluminum tube yoke
3 1/2" x 125 wall 6061-T6 DOM tubing
Track tested at over 1200 HP
Electronically balanced for high RPM usage
Made to exact length of stock Camaro and Firebird driveshaft length
Call us for longer or shorter lengths
None of the wimpy 1310 or 1330 yokes here!
Lifetime warranty!
* 1350 Spicer Series: Manufactured with OEM tolerances and treated with our Cryogenic Process to yeild the strongest U-Joint available. For drag racing applications a solid non-lube design U-Joint is recommended (included) because of the tremendous initial shock load, or short duration of high torque the joint must be able to withstand.
Note: This driveshaft is designed to replace the factory driveshaft when used with an aftermarket rear-end that has a 1350 yoke. To use this driveshaft with the factory 10 bolt rear, the U Joint will have to be replaced with a conversion U Joint, Napa pn# 240-0447.
I also have an SLP lid and SLP smooth bellows that are practically new as well. I will let them both go together for $100 shipped. Lid and bellows have been seperated. **Bellows sold to transam62930** **Lid sold to kokingSS**
Set of brand new factory LS1 spark plug wires w/heatshields $40 shipped
Oil pickup tube for 98-02 FBODY oil pan brand new in box w/o ring. $30 shipped
28# fuel injectors from my '98 Z28 w/approximately 40k miles. $40 shipped
Prothane torque arm mount w/hardware. Used for 1 month and then used the one that came with my new UMI torque arm. This piece is just like new and I might even still have the instructions. $20 shipped **SOLD**
Set of 16 factory pushrods from LS6 crate engine. These pushrods are like new and were only used during the first 500 miles of break-in for this engine. They are flawless. I will accept $40 shipped for these. **SOLD**
Stock '98 exhaust manifolds in perfect condition. $80 shipped
I also have all of the stock supension parts from my '98 Z28 for sale:
-Shocks and Springs
-Rear lower control arms
-Panhard bar
-Torque arm
-Front & Rear Swaybars
These suspension parts have around 40k miles on them and are all in excellent condition. There is no set price for these pieces and I will accept any reasonable offer + shipping.
These items are ready for immediate shipment and are available for face-to-face sale in Memphis area. Let me know if you have any questions.
Thanks,
Robert
I have a PST 3 1/2" Aluminum driveshaft for sale. It is barely used and has approximately 2000 miles on it. No track passes or anything like that. Basically new. I Paid $400 and I will sale for $350 shipped. See description below. **Sold to CW00BLACKTA**
Will support 1000 HP! Lifetime Guarantee!
Street - Strip Aluminum Driveshafts. 6061-T6 Dom tubing gives the most concentric Aluminum Driveshaft available. High strength aluminum tube yokes are Mig welded with less than 10 thousands total run out. The aluminum shaft is balance to less than 1/4 oz to assure vibration free operation.
Cryo treated performance dynamic solid 1350 U-Joints *
Cryo treated transmssion slip yoke
Heavy duty aluminum tube yoke
3 1/2" x 125 wall 6061-T6 DOM tubing
Track tested at over 1200 HP
Electronically balanced for high RPM usage
Made to exact length of stock Camaro and Firebird driveshaft length
Call us for longer or shorter lengths
None of the wimpy 1310 or 1330 yokes here!
Lifetime warranty!
* 1350 Spicer Series: Manufactured with OEM tolerances and treated with our Cryogenic Process to yeild the strongest U-Joint available. For drag racing applications a solid non-lube design U-Joint is recommended (included) because of the tremendous initial shock load, or short duration of high torque the joint must be able to withstand.
Note: This driveshaft is designed to replace the factory driveshaft when used with an aftermarket rear-end that has a 1350 yoke. To use this driveshaft with the factory 10 bolt rear, the U Joint will have to be replaced with a conversion U Joint, Napa pn# 240-0447.
I also have an SLP lid and SLP smooth bellows that are practically new as well. I will let them both go together for $100 shipped. Lid and bellows have been seperated. **Bellows sold to transam62930** **Lid sold to kokingSS**
Set of brand new factory LS1 spark plug wires w/heatshields $40 shipped
Oil pickup tube for 98-02 FBODY oil pan brand new in box w/o ring. $30 shipped
28# fuel injectors from my '98 Z28 w/approximately 40k miles. $40 shipped
Prothane torque arm mount w/hardware. Used for 1 month and then used the one that came with my new UMI torque arm. This piece is just like new and I might even still have the instructions. $20 shipped **SOLD**
Set of 16 factory pushrods from LS6 crate engine. These pushrods are like new and were only used during the first 500 miles of break-in for this engine. They are flawless. I will accept $40 shipped for these. **SOLD**
Stock '98 exhaust manifolds in perfect condition. $80 shipped
I also have all of the stock supension parts from my '98 Z28 for sale:
-Shocks and Springs
-Rear lower control arms
-Panhard bar
-Torque arm
-Front & Rear Swaybars
These suspension parts have around 40k miles on them and are all in excellent condition. There is no set price for these pieces and I will accept any reasonable offer + shipping.
These items are ready for immediate shipment and are available for face-to-face sale in Memphis area. Let me know if you have any questions.
Thanks,
Robert
Last edited by SLO98Z; Feb 12, 2008 at 07:02 PM.
Teching In
Joined: Jan 2008
Posts: 8
Likes: 0
From: CAJUNLAND
IS SLP LID AND BELLOW STILL FOR SALE, WILL TAKE BOTH, LET ME KNOW ASAP, WILLING TO SEND PAYMENT 2/12/08 ASAP cajuncarnut@***.net
