Dynatech ceramic coated stepped LS1 1 7/8" headers w/ 3.5" collectors FS
Dynatech ceramic coated stepped LS1 1 7/8" headers w/ 3.5" collectors FS this system is used and in great shape.
It consists of stepped 1 7/8 long tube DYNATECH headers that are ceramic coated - 520$ + brand new price ALONE FOR THE HEADERS...
then you have to buy two collectors for the headers. One per side and those range from 110-119 $ each. So you are looking at over 740$ + alone brand new for the headers and collectors. ( if you don't know already - you have to run dynatech collectors with their headers )
Collectors are 3.5" ( Y- PIPE NOT INCLUDED )
THIS EXHAUST IS MADE TO FLOW SOME SERIOUS EXHAUST AND WILL MAKE HP EVEN ON A STOCK ENGINE.
I originally was selling this as a complete exahust system from headers all the way to tailpipes. but decided to keep the y pipe section back for my car since no one wanted to buy the entire kit....
475 $ + shipping possible open to trades. ( this is cheaper then buying the headers alone from dynatech, jegs, summit, or anywhere else !
paul
http://community.webshots.com/user/bevawheela
CLICK ABOVE LINK FOR PHOTOS. THEN CLICK ' stuff fs ' you will see many photos click on the exhaust system and nitrous photos. Thanks !!
EDIT SOLD .........................
It consists of stepped 1 7/8 long tube DYNATECH headers that are ceramic coated - 520$ + brand new price ALONE FOR THE HEADERS...
then you have to buy two collectors for the headers. One per side and those range from 110-119 $ each. So you are looking at over 740$ + alone brand new for the headers and collectors. ( if you don't know already - you have to run dynatech collectors with their headers )
Collectors are 3.5" ( Y- PIPE NOT INCLUDED )
THIS EXHAUST IS MADE TO FLOW SOME SERIOUS EXHAUST AND WILL MAKE HP EVEN ON A STOCK ENGINE.
I originally was selling this as a complete exahust system from headers all the way to tailpipes. but decided to keep the y pipe section back for my car since no one wanted to buy the entire kit....
475 $ + shipping possible open to trades. ( this is cheaper then buying the headers alone from dynatech, jegs, summit, or anywhere else !
paul
http://community.webshots.com/user/bevawheela
CLICK ABOVE LINK FOR PHOTOS. THEN CLICK ' stuff fs ' you will see many photos click on the exhaust system and nitrous photos. Thanks !!
EDIT SOLD .........................
Last edited by 93Z286spd; Feb 20, 2008 at 08:52 PM. Reason: SOLD
primary tubes are stepped from 1 3/4 standard size to 1 7/8
collectors are stepped to a 3.5" output to your y pipe you have made or purchase, or to true duals you build. Here are links on the prices. I am firm on my price. I just priced how much it will be to ship to CA. It will cost me quite a bit to ship these headers... 525$ shipped to your door.
see the links below.
retail price for headers and 2 collectors brand new is 762$ + freight.
http://www.jegs.com/webapp/wcs/store...10002_70280_-1
http://www.jegs.com/webapp/wcs/store...10002_59874_-1
collectors are stepped to a 3.5" output to your y pipe you have made or purchase, or to true duals you build. Here are links on the prices. I am firm on my price. I just priced how much it will be to ship to CA. It will cost me quite a bit to ship these headers... 525$ shipped to your door.
see the links below.
retail price for headers and 2 collectors brand new is 762$ + freight.
http://www.jegs.com/webapp/wcs/store...10002_70280_-1
http://www.jegs.com/webapp/wcs/store...10002_59874_-1
ttt still available.. have had lots of emails and PMs about this setup.
collectors are non coated models. they have surface rust but nothing some sanding and hot temp painting coujld not take care of. Save a few hundred bucks here on this model flow some serious exhaust...
collectors are non coated models. they have surface rust but nothing some sanding and hot temp painting coujld not take care of. Save a few hundred bucks here on this model flow some serious exhaust...
