FS: slightly P&P'd 5.3 heads, comp 918s
Thread Starter
TECH Fanatic
iTrader: (12)
Joined: Apr 2007
Posts: 1,276
Likes: 0
From: Douglasville, GA
I have a set of LS2 injectors someone sold me, that I can't use now. I need a set of 8.1 injectors instead, so these are being sold for $100 plus shipping
($5-$10 bucks)
let me know if your interested.
($5-$10 bucks)
let me know if your interested.
Thread Starter
TECH Fanatic
iTrader: (12)
Joined: Apr 2007
Posts: 1,276
Likes: 0
From: Douglasville, GA
I am going to be pulling my slightly ported and fully hand polished 5.3(#706) heads off of my truck this weekend, I did some minor porting/mainly smoothing the rough edges and enlarging the runners, and then I went back and polished them.so they should flow alittle better than stock, or you could have some ls1 size valves put in them for cheap, and they'd flow even better. $100 plus shipping(firm) unless your real close to GA is gonna be about $50 or so.
I'll also have a used set of comp cam 918(the revised ones) with 2k miles on them $125 shipped.
If your interested in anything let me know.
I'll also have a used set of comp cam 918(the revised ones) with 2k miles on them $125 shipped.
If your interested in anything let me know.

