98 Trans Am...NEEDS TO GO!
02-25-2008, 11:47 PM
#1
Launching!
Thread Starter
iTrader: (14)
Join Date: Nov 2006
Location: texarkana, ar
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
98 Trans Am...NEEDS TO GO! SOLD
If someone wants the car as a roller will sell for $3500.00
I bought a 98 Trans Am Roller from a member on this site several months ago. In the mean time I bought all the parts to make the car a running car. I have sence then decided to sell the car as is. You would be purchasing a complete LS1 98 Trans Am with A4 with 97,000 miles, I am asking what I have in the car, which is $6500.
Now for the bad, the motor I purchased for the car was a 2000 model with 50,000 miles. During the proscess of doing a cam swap I found that the cam bearings were bad, then found that the #3 rod was slightly bent.
I have all the parts to put the motor back together except rings and bearings. The block is in perfect shape and will be ready for rebuild. I will pay to have the block work done if you elect to go with bigger bore size, we have a really good machinest in town that has a torque plate for LS1 motors.
Like I stated before you will have a complete car. This is not a roller. The car will make a great project car for someone, with a little more money you can have a brand new car.
The person buying the car will need to bring a Truck and trailer, have alot of parts!
The TA has a clear title, and as the car goes, nothing has been disasemble, everything is still intack. Just the motor needs to be rebuilt.
The prostars are not on the car. But other than that is looks exactly the same!
If someone wants the car as a roller will sell for $3500.00
I bought a 98 Trans Am Roller from a member on this site several months ago. In the mean time I bought all the parts to make the car a running car. I have sence then decided to sell the car as is. You would be purchasing a complete LS1 98 Trans Am with A4 with 97,000 miles, I am asking what I have in the car, which is $6500.
Now for the bad, the motor I purchased for the car was a 2000 model with 50,000 miles. During the proscess of doing a cam swap I found that the cam bearings were bad, then found that the #3 rod was slightly bent.
I have all the parts to put the motor back together except rings and bearings. The block is in perfect shape and will be ready for rebuild. I will pay to have the block work done if you elect to go with bigger bore size, we have a really good machinest in town that has a torque plate for LS1 motors.
Like I stated before you will have a complete car. This is not a roller. The car will make a great project car for someone, with a little more money you can have a brand new car.
The person buying the car will need to bring a Truck and trailer, have alot of parts!
The TA has a clear title, and as the car goes, nothing has been disasemble, everything is still intack. Just the motor needs to be rebuilt.
The prostars are not on the car. But other than that is looks exactly the same!
Last edited by little Red Camaro; 02-29-2008 at 03:05 PM.
02-26-2008, 09:47 PM
#7
TECH Fanatic
iTrader: (21)
Join Date: Oct 2006
Location: Everywhere
Posts: 1,105
Likes: 0
Received 0 Likes
on
0 Posts
I remember about buying that car when Richard had it! good luck on the sell!
I can account that if it's still in the same shape as it was 5 months ago, this car looks great!
oh, you should get in touch with 'Trust' about it. he might be interested.
I can account that if it's still in the same shape as it was 5 months ago, this car looks great!
oh, you should get in touch with 'Trust' about it. he might be interested.
