LS1 shortblock, Borla, pistons, rims, nitrous, pushrods, ect
LS1 shortblock, Borla, pistons, rims, nitrous, pushrods, ect EDIT Added alot of items and parting out the short block!
Have alot of stuff for sale, trying to get funds for my new project. All prices do not include shipping and will take BEST OFFER on anything. Located in Wilmington, NC and will ship at your expense. Will also meet someone within reasonable distance.
Centerforce Dual Friction Clutch and Flywheel- 8k miles, did a 800 mile break in. Seen maybe 3 track passes, but no clutch dumps (wanted to save the stock 10bolt, best 60' was a 2.3 lol) Great shape, taken out becuase im going with alot more power. Nothing was wrong with it. Has minor surface rust from sitting. $250
2001 WS6 rims. Stock 17s with 275/40/17s on 2 and somethign like 245s on the front, not sure and will check if interested. Will remove tires if wanted, they are pretty shot. I used them for burnout tires, just some old ones sitting around the shop. Also used them for a spare at one time. One has a nasty dent in it from where i hit a pothole. I did the mullet thing and hit it with a sledge hammer and put some JB wield on it
. May not look pretty but it acutally sealed and has held air for about a year now. I think it MAY have been able to be balanced too, not 100% sure on that though, i just used it while i was waiting on my new rims to get in. No curb rash on any of them (exclude the dent 
) $400 obo
Borla Adjustable catback w/ borla quad tips, about 20k miles i think. Car is from the south (NC) so there is no snow so you dont have to worry about salt. I dont have the adjustable plates, its open right now. Has a small dent in the right tip wich is shown in the pics, happened as i was backing up on the trailer when my little motor incident happned. I think it should be able to bend out, i havent messed with it. It isnt cleaned up and will do that when i take it off the car, wiped it off in one spot with a wet rag and looked good. Keeping it on till it sells becuase if i need to ship im going to have to cut it, if it sell locally (have 2 locals interested) then im just gonna drop my rear end and give it in one peice. Pics are where i started to take it off. pics are lop sided because i was in the middle of taking it off, not becuase it messed up.(just noticed i only have 2 pics, will snap more if anyone is interested). Will toss in my offroad y-pipe if you want it. Has a nice little section where it got hung up on the trailer as i was loading / unloading. Might be able to wield it up. about the size of a penny. $700obo
Stock rear springs from a 01 WS6, around 10k miles i wanna say. no idea what they are worth $100 obo?
Stock flycut pistons out of a 01 SS, 20k miles. Bought to put in mine when i was gonna cam it but the above happend. Think i paid $100 + shipping for these. Asking $75 obo.
Stock head gasket for an LS1, just opened to compare my old, think i paid like 70 + shipping from tsp, thats what im asking.
Set of 16 trick flow hardend pushrods. 7.500 .080. used in an LS2 for 200 miles. They look brand new. Wrong size for me. $80 OBO
BMN Window switch with first gear lockout. Used for one spray to see if it was working, it did. Didnt even connect the brake signal. $100 obo
Stock injectors out of a 2001 WS6, log says they were changed at 60k miles. car had 104k when taken out. So they have a little over 40k. no clue what they are worth, best offer.
Have alot of stuff for sale, trying to get funds for my new project. All prices do not include shipping and will take BEST OFFER on anything. Located in Wilmington, NC and will ship at your expense. Will also meet someone within reasonable distance.
Centerforce Dual Friction Clutch and Flywheel- 8k miles, did a 800 mile break in. Seen maybe 3 track passes, but no clutch dumps (wanted to save the stock 10bolt, best 60' was a 2.3 lol) Great shape, taken out becuase im going with alot more power. Nothing was wrong with it. Has minor surface rust from sitting. $250
2001 WS6 rims. Stock 17s with 275/40/17s on 2 and somethign like 245s on the front, not sure and will check if interested. Will remove tires if wanted, they are pretty shot. I used them for burnout tires, just some old ones sitting around the shop. Also used them for a spare at one time. One has a nasty dent in it from where i hit a pothole. I did the mullet thing and hit it with a sledge hammer and put some JB wield on it
. May not look pretty but it acutally sealed and has held air for about a year now. I think it MAY have been able to be balanced too, not 100% sure on that though, i just used it while i was waiting on my new rims to get in. No curb rash on any of them (exclude the dent ) $400 oboBorla Adjustable catback w/ borla quad tips, about 20k miles i think. Car is from the south (NC) so there is no snow so you dont have to worry about salt. I dont have the adjustable plates, its open right now. Has a small dent in the right tip wich is shown in the pics, happened as i was backing up on the trailer when my little motor incident happned. I think it should be able to bend out, i havent messed with it. It isnt cleaned up and will do that when i take it off the car, wiped it off in one spot with a wet rag and looked good. Keeping it on till it sells becuase if i need to ship im going to have to cut it, if it sell locally (have 2 locals interested) then im just gonna drop my rear end and give it in one peice. Pics are where i started to take it off. pics are lop sided because i was in the middle of taking it off, not becuase it messed up.(just noticed i only have 2 pics, will snap more if anyone is interested). Will toss in my offroad y-pipe if you want it. Has a nice little section where it got hung up on the trailer as i was loading / unloading. Might be able to wield it up. about the size of a penny. $700obo
Stock rear springs from a 01 WS6, around 10k miles i wanna say. no idea what they are worth $100 obo?
Stock flycut pistons out of a 01 SS, 20k miles. Bought to put in mine when i was gonna cam it but the above happend. Think i paid $100 + shipping for these. Asking $75 obo.
Stock head gasket for an LS1, just opened to compare my old, think i paid like 70 + shipping from tsp, thats what im asking.
Set of 16 trick flow hardend pushrods. 7.500 .080. used in an LS2 for 200 miles. They look brand new. Wrong size for me. $80 OBO
BMN Window switch with first gear lockout. Used for one spray to see if it was working, it did. Didnt even connect the brake signal. $100 obo
Stock injectors out of a 2001 WS6, log says they were changed at 60k miles. car had 104k when taken out. So they have a little over 40k. no clue what they are worth, best offer.
Last edited by skeels; Mar 6, 2008 at 05:33 PM. Reason: Added stuff
More:
Lifters- Stock out of 01 ws6. Boxed up and ready to ship. Looked to be in great shape.
LS1 Block- Ready to be shipped or picked up, has some minor surface rust, but nothing a hone cant take care of. $450 obo
LS1 Cam- Out of a 2001 WS6 108k miles. $25
LS1 Crank- Out of a 2001 WS6 108k miles. Good shape. $SOLD
LS1 Oil pump- Out of 2001 WS6 Had great oil pressure when pulled, $SOLD
LS1 timing set out of a 2001 WS6, 108k. Gear looks good, so does chain. $20
Lifters- Stock out of 01 ws6. Boxed up and ready to ship. Looked to be in great shape.
LS1 Block- Ready to be shipped or picked up, has some minor surface rust, but nothing a hone cant take care of. $450 obo
LS1 Cam- Out of a 2001 WS6 108k miles. $25
LS1 Crank- Out of a 2001 WS6 108k miles. Good shape. $SOLD
LS1 Oil pump- Out of 2001 WS6 Had great oil pressure when pulled, $SOLD
LS1 timing set out of a 2001 WS6, 108k. Gear looks good, so does chain. $20
Last edited by skeels; Mar 18, 2008 at 02:49 PM.
To answer a few questions I have gotten, yes I will part out the shortblock. The headgaskets are not MLS and are for stock bore. Yes I can ship and take paypal. And all prices are BEST OFFER!!!!
Trending Topics
Yikes, shipping for the block is gonna run around $300 to do it via Overnight freight(owned by ups i think). So if you guys have a cheaper mean on shipment for a large - heavy item, please say so.
Have a few pics of the flycut pistons but cant post them becase photobuckets new resize thing freezes both of my computer, so if you want some detailed pics of the flycut, PM me.
