Parting out 2002 T/A (19k miles)
Parting out 2002 T/A (19k miles) The car is a 2002 NHRA edition T/A. Mechanically complete with full ebony interior. It's an M6 car with 3.42 3 channel rear. I recently purchased it locally (Kansas City, KS), although it's spent most of it's life in New Mexico. It was involved in a roll over. Bags were not popped.
The interior is dirty from being in storage for over a year, although is in great condition. Very little wear as the car had such low miles. I've already begun disassembly and cleanup on the interior items.
The engine, trans, supporting components, and brakes are slated for my '68.
Items already sold or damaged in wreck:
Complete front clip (including headlight doors/motors)
Drivers mirror (mirror motor is complete and functional)
Drivers door
T-tops
Hatch
Tail lights
Rear bumper cover
L & R Side skirts
Monsoon CD w/ EQ
Console
Steering column
Leather Shifter boot
Hurst Shift ****
Hood struts
Front Seats
Air bags(2) w/ sensor
Alu Drive shaft
Gauge Cluster
Lower rubber shift boot
Interior minus console / seats
Items Pending:
Rolling chassis w/ engine compartment chassis wiring harness.
LS6 Intake
Cat Back
Battery tray
Pewter Passenger Door (w/mirror)
Items pulled although still available:
All items + actual shipping and stock OEM items unless stated
A/C Compressor / Evaporator / Lines / Accumulator (Complete system minus Condensor)
Rear Ebony Leather Seats - $150
Monsoon speakers (door / sail panel ) - $40/pair
Monsoon amp - Offer
Headlight Module - $50
Gas Tank - Offer
Rear Panhard bar - Offer
LCA's - Offer
Full set of shocks and springs - Offer
Rear end (3.42 2 channel) - $250
Full Trans Am chassis wiring harness - Offer
Front ABS Sensors - Offer
3 channel ABS module - Offer
Power steering cooler w/lines - Offer
Heater box w/ vacuum pots
Everything else is fair game. Let me know if you'd like pics/details.
(this pic shows the passenger door panel missing, although I do have it. I neglected to take a picture prior to beginning the tear down.)
The interior is dirty from being in storage for over a year, although is in great condition. Very little wear as the car had such low miles. I've already begun disassembly and cleanup on the interior items.
The engine, trans, supporting components, and brakes are slated for my '68.
Items already sold or damaged in wreck:
Complete front clip (including headlight doors/motors)
Drivers mirror (mirror motor is complete and functional)
Drivers door
T-tops
Hatch
Tail lights
Rear bumper cover
L & R Side skirts
Monsoon CD w/ EQ
Console
Steering column
Leather Shifter boot
Hurst Shift ****
Hood struts
Front Seats
Air bags(2) w/ sensor
Alu Drive shaft
Gauge Cluster
Lower rubber shift boot
Interior minus console / seats
Items Pending:
Rolling chassis w/ engine compartment chassis wiring harness.
LS6 Intake
Cat Back
Battery tray
Pewter Passenger Door (w/mirror)
Items pulled although still available:
All items + actual shipping and stock OEM items unless stated
A/C Compressor / Evaporator / Lines / Accumulator (Complete system minus Condensor)
Rear Ebony Leather Seats - $150
Monsoon speakers (door / sail panel ) - $40/pair
Monsoon amp - Offer
Headlight Module - $50
Gas Tank - Offer
Rear Panhard bar - Offer
LCA's - Offer
Full set of shocks and springs - Offer
Rear end (3.42 2 channel) - $250
Full Trans Am chassis wiring harness - Offer
Front ABS Sensors - Offer
3 channel ABS module - Offer
Power steering cooler w/lines - Offer
Heater box w/ vacuum pots
Everything else is fair game. Let me know if you'd like pics/details.
(this pic shows the passenger door panel missing, although I do have it. I neglected to take a picture prior to beginning the tear down.)
Last edited by Rhino; Mar 19, 2008 at 09:48 AM.
Trending Topics
Teching In
Joined: Nov 2007
Posts: 3
Likes: 0
From: coalgate,ok
How much for the entire interior seats front and back, door panels, all the inside trim etc.. That it would take to convert mine to ebony interior.. Please pm me
Last edited by crash69; Mar 2, 2008 at 08:57 PM.
Teching In
Joined: Nov 2001
Posts: 26
Likes: 0
From: Texas City, TX ,USA
How much for the following:
-Valve Covers and bolts that hold them to the head & valve cover gaskets
-Valley Cover
-PCV hoses
(Valley Cover to front of intake(pcv) +
vent hose that runs from pass valve cover to drivers side valve cover behind intake +
vent to throttlebody from pass cover)
-Coil Brackets and bolts that hold them to valve covers
-Valve Covers and bolts that hold them to the head & valve cover gaskets
-Valley Cover
-PCV hoses
(Valley Cover to front of intake(pcv) +
vent hose that runs from pass valve cover to drivers side valve cover behind intake +
vent to throttlebody from pass cover)
-Coil Brackets and bolts that hold them to valve covers
Last edited by jdb8805; Mar 2, 2008 at 09:13 PM.
