ok i have a set of 8 brand new in box, eagle forged H beam connecting rods for an ls1, they include clevite77 bearings, and arp 2000 rod bolts.
basically they are for a stock stroke, stock crank (unmachined) for a .927 wrist pin (you can get this on almost any aftermarket piston)
asking 500 shipped
http://www.eaglerod.com/products/Che...S1%20rods.html




i also have a brand new set (16 lifters) of ls7 style hydraulic roller lifters (these fit ls1 as well) great upgrade from factory
asking 100 shipped for these



finally i have a set of diamond piston rings (brand new complete set) these are for a 3.905 bore, which is a 10 over ls1 bore, (stock is 3.898) these are good for an unmachined block, or a fresh honed block, or 5 over or 10 over. the top ring is chrome steel, and the bottom is cast iron. good upgrade for any app (FI, nitrous, etc)
asking 250 shipped for these

 

pm sent on the ls7 lifters

 

Tried to send you a PM on the rods/bearings but your box is full. I'm interested but was looking for the part numbers on the rods and bearings to make sure they are right for my build.

Thanks!

 

Clear you PM box it's full
2nd in line for the LS7 lifters
Paypal on standby

 

What length of rods

 

pm replied on the ls7 lifters
awaiting payal info to send the $100

 

sorry about the inbox everyone its clear now, last time i checked the rods i believe their 6.125 long. you can check with eagle the part number is right there on the box.. heres a pic of the part number written on the rod itself, also some more part numbers of the bearings, and lifters.

 

money sent LS7 lifters sold!!!

 

This some BS as I clearly posted before you and you aknowledged that you where 2nd inline!!!!

 

i am not ripping anyone off here, james was second to respond, but he was first to meet my asking price, it dosent make sense to sell it for less just because you responded 10 minutes earlier

 

LOOK AT YOUR LISTING AGAIN, I said that i was awaiting paypal info to send the $100 shipped!!!!!!!! It's clearly stated on post #6.

 

I offered higher than the asking price while you offered him 80.00.
1st you offered 80
2nd I offered 105
3. Now you want to match my offer of 105

Item has already been sold at 105 your offer of 80 wasn't enough...

 

The lifter sets only 108 from SDPC if you really want a set

 

Thats the most simple and intelligent way to put it...

 

I Offered $100 shipped which was listed on the listing, look at post #6. Also i was paying the paypal fee also, so it was still $105!!!!!! This isn't ebay!!!!

 

i responded to his pm immediately, i can copy all of the pm's and post them here, if you would like. Its cool though, you can keep them, as you probably need them more than me anyway......

 

bumpp for night

 

pm sent...

 

I sent you a PM on the rods/bearings

 

bumppp