Thinking about selling/checking interest in my f13 cam 230"/232" .595"/.585" 112LSA with 6000miles...who would be interested??? Cam is in very very good condition! i would let it go for around $300 (or best offer) shipped.

Im thinking about going to a g5x3 on a 112lsa, but i'd need to sell this cam first!

Let me know if you'd be interested!

Thanks,

DeAndre

 

new price...$280 shipped

 

I'm learning here(ls1's) ,so bare with me.....im doing a s10 swap with a ls1 6 speed,as far as headers,there is only 1 1/2 tubes availab or stock camaro manifolds.would this cam be to big for my application?(honestly).thanks..

 

How many miles?

 

Im very interested in this cam as Ive been planning on getting it for a few months now, Ill send a pm your way in a few seconds.

 

This has been said to be a very good cam for a cam only set-up...possibly the best IMO Headers, exhaust, and a ported throttle body will bring out the potential in the cam but it can be ran with stock manifolds. You will need new valve springs. try some searches for f13 cam only...Hope this helps!

DeAndre

 

Sent you a pm...

 

6,000 miles...cam looks great! It has no grooves in it...you can obviously see that it had been slightly used, but other than that, the cam is in super good condition...almost brand new! I never installed it in my motor since buying it from a member on this board, it's been just sitting in my house.

 

how would the cam work in a 5.3

 

It would lope harder and have the charactoristics of a cam bigger than it actually is, due to the 5.3 being smaller in cubic inches to a 5.7...hope that helps.

 

cam sold!!!