Strange 12 Bolt. This is a "complete" bolt-in rear end~you don't need to take your rear end apart, or send in backing plates, etc. This is a bolt in for 3 channel, equipped with ring for ABS as well.

PRG210-Fully assembled and dyno tested 12 bolt rear (less brakes);
Features:
*3.150" ID Housing Ends
*33 spline S/S axles
*1/2" or M12 x 1.5 studs
*33 spline Torque-Line Posi Unit
*3 channel (center) ABS
*Caliper Mounts (98-02)
*U1602 S-Series Yoke (1350)
*Crossover U-Joint, U-Bolts
*3.73 U.S./Strange standard gear set
*Includes Backing Plates you don't need to do anything! 100% Bolt-In!

**Upgrades listed below:

*PRGOP14 Super Strength Posi Unit with Ring
*PRGOP10 Aluminum Support Cover

Less then 8k on it. No track time. SOLD!


Strange Chromoly Drive Shaft available. SOLD!


LS6 Intake SOLD!

Dart 225's 62cc heads. 205 int. 160 exh. SOLD!




The intake is all that's left. SOLD!


Ron

 

bump for a good deal on them 225's and the 12 bolt

 

do you still live in fort myers??

 

Yep . . . Still here.

 

Why are you parting out the car?

 

I'm not parting out the car. Everything listed I bought & never installed. They are just sitting in my garage. Call me lazy.

 

Ya sound like me... anyways, goodluck. That is a good price on those darts.

 

Thanks Chris

Ya never know, i may still have the rear when your ready for it.

 

man i wish i had the cash for that right now... great deal and good luck on selling it

 

Does the darts include valves and springs? New or used.

 

i would get the rear end if u could ship it.

 

How bout the heads r they assembled or what

 

The heads are complete. I'll post pics tonight and answer any questions/pm's.

 

i wish i lived not so on the opposite side of the country, i would take the rear

 

im wanting the rear except the distance is pretty big

 

I have the same problem.....unfortunately south Florida is a long drive from everywhere but Florida!!!

 

pm sent

 

Bump for pics!

 

what are the flow numbers on these heads? i cant seem to find any.

 

Good question. I don't have the flow sheet so hopefully someone who has a set can supply some info.