Eastern Members CT, DE, NH, NJ, NY, MA, ME, MD, PA, RI, VT, VA, WV

FS: Gunmetal ZR1s / LS7 clutch kit / HIDs / etc

Thread Tools
 
Search this Thread
 
Old Mar 27, 2008 | 10:07 PM
  #1  
Reidonly's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Aug 2005
Posts: 235
Likes: 0
From: Lancaster, PA
Default FS: Gunmetal ZR1s / LS7 clutch kit / HIDs / etc

I have a few things for sale in the Lancaster PA area (17603), I prefer local pickup/meet up if at all possible, but arrangements can be made if necessary. I am within a short drive of York, Harrisburg and Reading.

1) Gunmetal ZR1's with polished lip:
- 17x9.5 / 17x11
- hard to find in this color
- Sumitomo HTR-Z 275/40-17 & 315/35-17 - fronts have some usable tread (worn on outer edge a bit), but rears need replaced.
- ***SOLD!***


2) LS7 clutch kit with new GM slave:
- LS7 clutch
- LS7 pressure plate
- LS2 flywheel
- GM slave cylinder
- All items are brand new bought from a GM dealer, never installed. Has LS2 flywheel to work with LS1 Fbodies and LS1 GTOs (not sure about LS2 GTOs).
- ***SOLD!***


3) Hurst white shift ****:
- 2-1/4" ****
- shift pattern on top
- ***SOLD***


4) WS6store short stick:
- 6.5" stick (longer of the two available)
- ***SOLD!***


5) 4300K HIDs:
- plug and play kit for 9006 style bulbs
- will work with low beam on 98-02 Camaro, or any other car with 9006 bulb
- 4300K color temperature (pure white, no blue or purple tint - just clean pure light)
- ***SOLD!***


6) Whisper lid with K&N filter:
- used lid and used filter
- K&N was cleaned, but still needs to be oiled before use
- ***SOLD!***


7) Macewen white face gauges:
- for 99-02 Z28 & SS
- top notch white face gauge overlays
- Trans Am trim bezel
- do not need to remove needles, overlays slip over them
- $100

*FYI these are currently selling new for $170 with the TA bezel* link




8) T-top shades:
- from 2002 Camaro w/ ebony interior
- Mint condition, never intalled, still in plastic bag with velcro pads
- $50

(Image from ebay of similar item - not actual item)

Last edited by Reidonly; May 8, 2008 at 08:36 PM.
Reply
Old Mar 28, 2008 | 09:50 AM
  #2  
Goat2NV's Avatar
11 Second Club
iTrader: (19)
 
Joined: Jun 2007
Posts: 247
Likes: 0
From: Bowie, Maryland
Default

PM sent on the clutch
Reply
Old Mar 28, 2008 | 09:58 AM
  #3  
BlackScreaminMachine's Avatar
Internet Mechanic
20 Year Member
iTrader: (17)
 
Joined: May 2005
Posts: 9,830
Likes: 2
From: Wallingford CT
Default

Nice RIMS!
Reply
Old Mar 28, 2008 | 10:21 AM
  #4  
lastcall190's Avatar
TECH Addict
iTrader: (36)
 
Joined: May 2004
Posts: 2,656
Likes: 4
From: NJ
Default

Ugh I want those rims so bad... too bad I can't find a buyer for my polished. Nice parts and prices.

-J
Reply
Old Mar 28, 2008 | 10:33 AM
  #5  
camaroguy26's Avatar
TECH Resident
iTrader: (21)
 
Joined: Sep 2005
Posts: 820
Likes: 0
From: New Jersey
Default

is that HID kit a true plug and play or is there any cutting to the headlight housings? I don't want to cut anything up.
Reply
Old Mar 28, 2008 | 08:48 PM
  #6  
Navy01Z's Avatar
Launching!
iTrader: (4)
 
Joined: Sep 2007
Posts: 254
Likes: 0
From: Beacon Falls, CT
Default

pm sent on the short stick.
Reply
Old Mar 28, 2008 | 11:06 PM
  #7  
Reidonly's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Aug 2005
Posts: 235
Likes: 0
From: Lancaster, PA
Default

Originally Posted by camaroguy26
is that HID kit a true plug and play or is there any cutting to the headlight housings? I don't want to cut anything up.
It is a plug and play kit, no splicing etc required. But it is sold pending payment.
Reply
Old Mar 28, 2008 | 11:07 PM
  #8  
Reidonly's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Aug 2005
Posts: 235
Likes: 0
From: Lancaster, PA
Default

PMs returned. Thanks for looking.
Reply
Old Mar 28, 2008 | 11:25 PM
  #9  
Navy01Z's Avatar
Launching!
iTrader: (4)
 
Joined: Sep 2007
Posts: 254
Likes: 0
From: Beacon Falls, CT
Default

payment sent!!
Reply
Old Mar 30, 2008 | 01:30 PM
  #10  
Reidonly's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Aug 2005
Posts: 235
Likes: 0
From: Lancaster, PA
Default

Thanks for the interest so far. BUMP!
Reply
Old Mar 31, 2008 | 10:33 PM
  #11  
Reidonly's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Aug 2005
Posts: 235
Likes: 0
From: Lancaster, PA
Default

**Added #7 to the list in the first post - Macewen white face gauge overlays with TA bezel.**
Reply
Old Apr 1, 2008 | 12:10 AM
  #12  
GTP231's Avatar
Teching In
 
Joined: Feb 2007
Posts: 29
Likes: 0
From: Downingtown PA Now Slower Lower DE
Default

Wtf?!
Reply
Old Apr 1, 2008 | 10:14 PM
  #13  
cruzin94's Avatar
12 Second Club
iTrader: (2)
 
Joined: Feb 2007
Posts: 346
Likes: 0
Default

im intrested in the rims id like to come check them out i live in glen rock its right on the other side of york so if you could pm me with detail of where you live i would be very intrested
Reply
Old Apr 1, 2008 | 10:37 PM
  #14  
Reidonly's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Aug 2005
Posts: 235
Likes: 0
From: Lancaster, PA
Default

Originally Posted by cruzin94
im intrested in the rims id like to come check them out i live in glen rock its right on the other side of york so if you could pm me with detail of where you live i would be very intrested
I actually received a big response to the wheels. There are a couple of people in line for them at the moment. I will keep you posted.
Reply
Old Apr 3, 2008 | 09:16 AM
  #15  
makxc50099's Avatar
Staging Lane
 
Joined: May 2006
Posts: 58
Likes: 0
Default

clutch still for sale? and also is the ls2 flywheel the same as the ls7 flywheel?

Last edited by makxc50099; Apr 3, 2008 at 09:37 AM.
Reply
Old Apr 10, 2008 | 10:58 PM
  #16  
John02Hawk's Avatar
TECH Enthusiast
20 Year Member
iTrader: (4)
 
Joined: Sep 2003
Posts: 701
Likes: 0
From: Rogers, Ark.
Default

REID!

I want the wheels dude, PM sent!
Reply
Old Apr 11, 2008 | 06:55 AM
  #17  
Zturd's Avatar
TECH Fanatic
iTrader: (12)
 
Joined: Jan 2002
Posts: 1,249
Likes: 0
From: York, PA
Default

DONT BUY THIS CRAP!!!!!!!!! He's just using it to support a bad ricer drug habit!!!!!!!! I refuse to play this Reindeer game. Plus this seller will leave beer at your house and not drink it!!!!!!!! Do you feel comfortable with that? HUH!!! DO YA!!!
Reply
Old Apr 11, 2008 | 07:26 AM
  #18  
lastcall190's Avatar
TECH Addict
iTrader: (36)
 
Joined: May 2004
Posts: 2,656
Likes: 4
From: NJ
Default

Originally Posted by Zturd
Plus this seller will leave beer at your house and not drink it!!!!!!!! Do you feel comfortable with that? HUH!!! DO YA!!!
Well it is free beer...
Reply
Old Apr 11, 2008 | 08:35 AM
  #19  
Mattsz28's Avatar
On The Tree
iTrader: (1)
 
Joined: May 2007
Posts: 150
Likes: 0
Default

Anyone ****** these wheels up? I have cash in hand if not. I'd come tonight.
Reply
Old Apr 11, 2008 | 09:43 AM
  #20  
72RATCAMARO's Avatar
Staging Lane
 
Joined: Feb 2005
Posts: 56
Likes: 0
Default

is the clutch kit still availble? send me a pm if it is.
Reply



All times are GMT -5. The time now is 02:13 PM.