stage 3 cnc patriot ported 035s(same as 317s) The valves are REV 2.08/1.60's. The springs are patriot gold duals with titanium retainers
72cc combustion chamber
and then PORTED EXTENSIVELY by forcefed performance
they flowed 340@650 on the intake side and 285@650 on the exhaust
ill take 1000 shipped PLUS THE PAYPAL FEES

feel free to call
att:423-258-8510
verizon:423-608-3530
with any questions

 

come on guys no1 needs a good set of heads??

 

up top for a set of good heads

 

would these be ok on a 346ci LS1 with a mild 228 cam?

 

u would need to mill them unless u plan on a turbo

 

What were they on motor wise?

 

a 5.7

but 035s are designed for 6.0 motors but these will fit a 5.7

 

Looks like a decent set of heads for the money. Good luck with the sale.

For you guys wanting something N/A, you will have to mill them for sure to bring your compression back up a bit. 72cc chamber is knocking on a 9.X:1 ration range for your Static Compression Ratio.

 

see even the mods know this is a good deal

and yea like he said itll drop your compression ratio perfect for F/I

 

bump ........

 

come on guys this is a good price

 

up top........

 

TTT Nice to see you are using your mattress to keep them safe LOL

 

yes im more careful with these heads than i am my girlfriend

 

bumpity bump bump

 

if i wasn't deploying i would be interested, gotta wait til i get home now to take the dumdumdumdumdum in a new direction

 

My motor is stock. How much needs to be milled? What size will the chamber be? What would be a good cam for these. Can you tell I am new at building an engine!!

 

still working here on my end.. still want to pick up yours. if someone buys mine i'll take yours.

 

.007 will shave aprox. 1cc off. so about .040-045 will bring them back to stock CR for a ls1. I milled my 6.0 heads .045.............

 

yea dude i hope im gettin alot of tugs but no1 wanting to bite ther hook





pms sent