non-LSX Parts For Sale SBC, LT1, V6, etc.

Monster garage clean out! Want these parts GONE!

 
Thread Tools
 
Search this Thread
 
Old Apr 16, 2008 | 10:46 PM
  #1  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default Monster garage clean out! Want these parts GONE!

Trying to free up some space, all prices are OBO and DO NOT include shipping. If you see something you want and don't agree with the price, MAKE ME AN OFFER! PM'S WILL GET FASTER REPLIES! Also would consider trading for some 275/40/17 DR's (Nitto or BFG), a stock LT1 A4 shifter assembly (just the shifter assembly, do not need cables/shift handle). Additionally, I am looking for a brake hose retaining clip for the center brake hose on a 3 channel LT1 car. Local pick up is Northern VA.

Chrome 12 bolt diff cover (will come with bolts) $25




1 Goodyear Eagle GT HR 245/50/R16 with 7/32 of tread $20




ONE SET of stock LCA’s and TWO stock panhard rods
LCA’s $20 for the set
Panhard rods $10 each


Light gray kick panels $20


Light gray A-pillar moldings for a 97-newer Camaro with T-Tops $20


Lift supports from a 97 Z-28 $30


97 Camaro Z28 ABS pump (with traction control) $40


Camaro cluster hood $10


LT1 knock module $5


rear hatch panel speaker cover $5


passenger side Trans Am window $20


Light gray sail panels $20 for all (LOCAL PICK UP ONLY)





Last edited by fastenough; May 6, 2008 at 08:08 AM. Reason: updated
Old Apr 16, 2008 | 10:47 PM
  #2  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default

T-tops; glass has a few minor scratches plastic interior pieces are slightly scuffed, see pics. Since people are already bitching about the size of my pics, I will email super high resolution pics of the VERY small scratches upon request. No key. $50 each





Camaro driver side power door (comes with glass and window motor/regulator) $75


Camaro passenger side power door (comes with glass and window motor/regulator) $75




Stock LT1 flexplate bolts $5


Battery (LOCAL PICK UP ONLY) Barely used, was in my car disconnected while it was in the shop. Holds a charge and starts an LT1 F-body no problem. $20

Last edited by fastenough; May 12, 2008 at 09:21 PM.
Old Apr 16, 2008 | 11:09 PM
  #3  
Slvr00Bird's Avatar
TECH Fanatic
iTrader: (2)
 
Joined: Jan 2007
Posts: 1,419
Likes: 0
From: Ashland & Lexington, KY
Default

I'm sorry, can you get me some bigger pictures of the.... =p
Old Apr 17, 2008 | 08:33 AM
  #4  
96Blackbetty's Avatar
Staging Lane
 
Joined: Jan 2008
Posts: 57
Likes: 0
Default

Would those wires work for a 96 trans am alright. Also would the weather stripping be priced for both. Last but not least. Can u get me some bigger pictures I cant see them well. LOL
Old Apr 17, 2008 | 11:30 AM
  #5  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default

O2 sensors sold.
Old Apr 18, 2008 | 07:43 PM
  #6  
97bandit's Avatar
Teching In
 
Joined: Dec 2007
Posts: 6
Likes: 0
From: Southwest,MO
Default

Do you still have these wires?
Old Apr 20, 2008 | 01:26 AM
  #7  
tspence45's Avatar
TECH Addict
iTrader: (30)
 
Joined: Jan 2007
Posts: 2,153
Likes: 1
From: Monmouth, Illinois
Default

How much for the valve covers and plug wires shipped to 61462?
Old Apr 20, 2008 | 07:20 PM
  #8  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default

valve covers and plug wires sold.
Old Apr 21, 2008 | 07:29 PM
  #9  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default

up ttt
Old Apr 23, 2008 | 10:44 AM
  #10  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default

ttttt
Old Apr 23, 2008 | 08:06 PM
  #11  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default

center cap sold.
Old Apr 25, 2008 | 09:32 AM
  #12  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default

up up and away!
Old Apr 27, 2008 | 09:36 AM
  #13  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default

ttttt
Old Apr 27, 2008 | 11:50 AM
  #14  
99'CajunFirehawk157's Avatar
TECH Addict
15 Year Member
Photogenic
Photoriffic
Liked
iTrader: (57)
 
Joined: Jun 2007
Posts: 2,771
Likes: 18
From: USA
Default

resize your pics!
Old Apr 28, 2008 | 09:07 PM
  #15  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default

ttttt
Old May 2, 2008 | 11:59 AM
  #16  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default

ttttt
Old May 5, 2008 | 02:33 PM
  #17  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default

ttttt, torque arm bushing, t-top seals, and LCA's pending.
Old May 5, 2008 | 03:49 PM
  #18  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default

torque arm bushing sold
Old May 5, 2008 | 10:24 PM
  #19  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default

t-top seals sold
Old May 8, 2008 | 08:29 AM
  #20  
fastenough's Avatar
Thread Starter
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 324
Likes: 0
Default

tttttt
 




All times are GMT -5. The time now is 10:18 PM.