Have alot of stuff for sale, trying to get funds for my new project. All prices do not include shipping and will take BEST OFFER on anything. Located in Wilmington, NC and will ship at your expense. Will also meet someone within reasonable distance. I will accept trades, I need some lifters, cam, 7.4 pushrods, and springs.

Rollmaster double roller timing set- I purchased this used (unknown miles but i didnt purchase anything over 3k miles). Cant find the topic but I remember it being advertised as "like new" and that it is. One pack of bolts isnt even opened. SOLD

LS1 timing set out of my 2001 WS6, 108k miles. Gear looks good, so does chain. $20


Fbody Oil Pan - Came off my 01 WS6, my new motor came with one. Comes complete with everything, windage tray, oil pickup tube. Started to clean it up but it was about to storm so I took a few pics of it still semi-wet. $200 - SOLD

LS6 Ported oil pump - Purchased used from a member on here but I never used it. Also cant find the topic but like stated before I didnt purchase anything with over 3k miles. It was originally from Texas Speed. $SOLD

Centerforce Dual Friction Clutch and Flywheel- 8k miles, did a 800 mile break in. Seen maybe 3 track passes, but no clutch dumps (wanted to save the stock 10bolt, best 60' was a 2.3 lol) Great shape, taken out becuase im going with alot more power. Nothing was wrong with it. Has minor surface rust from sitting. $250



2001 WS6 rims. Stock 17s with 275/40/17s on 2 and somethign like 245s on the front, not sure and will check if interested. Will remove tires if wanted, they are pretty shot. I used them for burnout tires, just some old ones sitting around the shop. Also used them for a spare at one time. One has a nasty dent in it from where i hit a pothole. I did the mullet thing and hit it with a sledge hammer and put some JB wield on it . May not look pretty but it acutally sealed and has held air for about a year now. I think it MAY have been able to be balanced too, not 100% sure on that though, i just used it while i was waiting on my new rims to get in. No curb rash on any of them (exclude the dent ) $400 obo


Borla Adjustable catback w/ borla quad tips, about 20k miles i think. Car is from the south (NC) so there is no snow so you dont have to worry about salt. I dont have the adjustable plates, its open right now. Has a small dent in the right tip wich is shown in the pics, happened as i was backing up on the trailer when my little motor incident happned. I think it should be able to bend out, i havent messed with it. It isnt cleaned up and will do that when i take it off the car, wiped it off in one spot with a wet rag and looked good. Keeping it on till it sells becuase if i need to ship im going to have to cut it, if it sell locally (have 2 locals interested) then im just gonna drop my rear end and give it in one peice. Pics are where i started to take it off. pics are lop sided because i was in the middle of taking it off, not becuase it messed up.(just noticed i only have 2 pics, will snap more if anyone is interested). Will toss in my offroad y-pipe if you want it. Has a nice little section where it got hung up on the trailer as i was loading / unloading. Might be able to wield it up. about the size of a penny. $600 or trade for true duals

 

Stock rear springs from a 01 WS6, around 10k miles i wanna say. no idea what they are worth $80 obo?



Stock flycut pistons out of a 01 SS, 20k miles. Bought to put in mine when i was gonna cam it but the above happend. SOLD


Stock head gasket for an LS1, just opened to compare my old, SOLD

Set of 16 trick flow hardend pushrods. 7.500 .080. used in an LS2 for 200 miles. They look brand new. Wrong size for me. $80 OBO



BMN Window switch with first gear lockout. Used for one spray to see if it was working, it did. Didnt even connect the brake signal. $100 obo

Stock injectors out of a 2001 WS6, log says they were changed at 60k miles. car had 104k when taken out. So they have a little over 40k. no clue what they are worth, best offer.

LS1 Block- Ready to be shipped or picked up, has some surface rust as shown in the pics. The walls look like the pics below, the last pic is the only one that bad and is by far the worst one. Most look like the other 2. $250+shipping obo




LS1 Cam- Out of a 2001 WS6 108k miles. $25


Rear Cover Dont have a pic of it, but its a rear cover for an LS1 motor. My new motor came with one. [b]$30[\b]

 

Oil pan sold & shipped out earlier today.

 

pm sent

 

Will also consider an aftermarket driveshaft, adj torque arm, LCA, PHB, ect. I will reduce the price if you buy more than one item (such as timing set and oil pump together). Also have a cam I am about to take out of my motor, never ran just installed.

238/240 605/608 114 Comp Cam No miles, just installed - $300

 

All prices are best off and can ship out next buisness day. I take paypal and any other method really, paypal is prefered though.

 

PM me about the block, very interested

 

Need this stuff gone, make offers

 

Could I get pics of the block ? Would you take $375 shipped to 92551 ?

 

Got the pan and pickup today.

thanx

just as described

 

Ill get a quote on shipping monday and let you know something.

 

Alright !

 

Price drop on the block.

 

Damn I would take that block if you were in houston but shipping would be an arm and a leg.

 

Ya about $300. I dont see how my shortblock was shipped to me for about $150 from cali to NC when my bare block would cost $300ish. If anyone was to see what shipping would be my zip is 28405 and will drop it off at any terminal within reasonable distance. I will put it on a pallet and all that for free.

 

Just spent about $1,000 at texas speed, need these parts sold so im not broke for a while . Shoot me an offer on anything, Ill probably take it.

 

If it can be shipped for $150 I'll buy it ! Let me research it or of anyone knows how this is done please chime in !

 

PM sent on the pistons. I'll pay extra to overnight them!

 

I sold 6 of my good stock pistons that I did not have listed to him instead of the flycuts since they would fit his application better, so the flycut pistons are still availible. Shipped my stock set a few hours ago and the should be there tomorow afternoon!

 

Payment sent on timing set and pistons!