VRX3 Cam for Sale
VRX3 Cam for Sale I have a used VRX3 cam for sale. Its a 226/228 .585/.588 114+4.
It Made good Power through out, great driveabilty, and overall a Great Daily Driver cam. I'm pretty sure i still have the cam card and I will send it with the cam.
Cam only with full exhaust, supporting bolt-ons, 3400 stall, and 3.73s it made close to 390rwhp in my A4 (this is with an ls6 intake and using stock ls1 heads). There are M6 guys putting down over 400rwhp with this cam and the appropriate supporting bolt-ons (Search Dyno Section).
Cam was removed last Friday and has just been sitting in a box. From the pics you can still see some oil on it. I'll clean it up a bit more before shipping.
$275 Shipped.
Here are some Pics:
Cam Card:
http://farm3.static.flickr.com/2280/...2eff5080_o.jpg
VRX3 Cam:
http://farm4.static.flickr.com/3199/...105803c1_b.jpg
Top:
http://farm3.static.flickr.com/2206/...8e5a29f5_m.jpg
Bottom:
http://farm3.static.flickr.com/2178/...3ec76e0c_b.jpg
Left:
http://farm3.static.flickr.com/2025/...4c7d23a8_b.jpg
Center:
http://farm3.static.flickr.com/2318/...795c78aa_b.jpg
Right:
http://farm4.static.flickr.com/3029/...307e1556_b.jpg
It Made good Power through out, great driveabilty, and overall a Great Daily Driver cam. I'm pretty sure i still have the cam card and I will send it with the cam.
Cam only with full exhaust, supporting bolt-ons, 3400 stall, and 3.73s it made close to 390rwhp in my A4 (this is with an ls6 intake and using stock ls1 heads). There are M6 guys putting down over 400rwhp with this cam and the appropriate supporting bolt-ons (Search Dyno Section).
Cam was removed last Friday and has just been sitting in a box. From the pics you can still see some oil on it. I'll clean it up a bit more before shipping.
$275 Shipped.
Here are some Pics:
Cam Card:
http://farm3.static.flickr.com/2280/...2eff5080_o.jpg
VRX3 Cam:
http://farm4.static.flickr.com/3199/...105803c1_b.jpg
Top:
http://farm3.static.flickr.com/2206/...8e5a29f5_m.jpg
Bottom:
http://farm3.static.flickr.com/2178/...3ec76e0c_b.jpg
Left:
http://farm3.static.flickr.com/2025/...4c7d23a8_b.jpg
Center:
http://farm3.static.flickr.com/2318/...795c78aa_b.jpg
Right:
http://farm4.static.flickr.com/3029/...307e1556_b.jpg
Last edited by 2002BLKWS6; Apr 23, 2008 at 11:56 AM. Reason: Adding Pic Links
I ran it once with my stock heads (also still had my stock TB and ls6 intake)... but i also was on street tires and had terrible 60' times (2.0x). I still went mid 12's at Silver Dollar Raceway. But b/c I was on street tires i was only launching at like 1600-2000rpms (couldnt take full advantage of my stall). With some DRs and a better 60'... I probalby coulda gotten low 12's and flirted with 11's.
Trending Topics
No never ran it at the track with my heads. Cam only Car did almost 390 with stock heads and supporting bolt-ons. I only ran this cam at the track once but i was on street tires. Did mid 12's with a 2.02 sixty foot.
With my heads, car did about 427/381 thru a locked stall.
Here are a few threads from the dyo section with the exact same cam:
https://ls1tech.com/forums/showthrea...highlight=vrx3
https://ls1tech.com/forums/showthrea...highlight=vrx3
https://ls1tech.com/forums/showthrea...highlight=vrx3
With my heads, car did about 427/381 thru a locked stall.
Here are a few threads from the dyo section with the exact same cam:
https://ls1tech.com/forums/showthrea...highlight=vrx3
https://ls1tech.com/forums/showthrea...highlight=vrx3
https://ls1tech.com/forums/showthrea...highlight=vrx3
