I've had this stuff sittin' for a while, if you have any interest let me know.

TCI SSF 3500: In Box ready to go. about 10k miles and a couple dozen track passes. I took it out last year cause my new tranny came with it's own. $250 + shipping

Stock aluminum driveshaft: SOLD

Stock Torque Arm: $40

Stock 01 camshaft $30

Stock Crank Pulley: $30

Stock LCA's: SOLD

Stock Rotors: 30k miles fronts need turning $20

Stock PHB: $30

Stock Torque Converter 4l60E: 35k miles on it, perfectly fine. $100

10 bolt Rear: 50k miles on it. 4 channel 3.23's. The rear is disassembled and it needs the pinion bearing rebuild/replaced, gears/posi/axles etc are fine. This rear could be rebuilt and used fine. $150 obo. (I will have extra backing plates in a few weeks for sale as well)


10 bolt Rear #2: 4 channel 3.42 gears but the posi is failing, just took it off my car. $300 WITH backing plates. If you need a rear asap this will make your car drivable. If the posi is rebuilt it could be perfect, no noise)

If you want the backing plates separate then it's $150 for those.

Jeep Cherokee Hitch: Class 3 Reese. Bought it off a member for my 93 cherokee and never got to putting it on, I sold the truck. $75

3 kicker comp VR's subs in sealed box I've had these for some time cost me over $600 new. They still work great and they slam. box is about 39x18x15 and weighs over 100 lbs. Wired in 2 ohm's, boxed was assembled and wired by a professional and the speakers sound great. $250 (I'm getting too old for what these can do)


(I wasn't gonna sell the amp but it's a excelon class D, 800 watts rms at 2 ohms', but we can talk. 6x9's are $200 Excelons in nice boxes, they still sound decent $100)

 

Oh one thing I made be interested for trade is golfing equipment, I need to buy new clubs but, I'm only a hacker

 

Danno,

I will take the LCA,s and the driveshaft. Are you going to the track Sat ? If not I can PP you the money and get them whenever.

Ted

 

I'll hold em' for you. I can't go this Saturday. I am going to ME on Friday and staying for a week. We can either figure it out when I get back or I can leave em' at my folks house in Westminster and you can grab em' there anytime.

 

Danno,

I work in lexington. Is it you that works up this way ???

 

I work in Waltham. So I wouldn't be too far away.

 

if the deal on the driveshaft falls through... im in, can paypal u the $ or hand it to u in cash... im in haverhill

 

Couple things sold, couple things added

I'm gonna be outta the loop for a week. If anybody calls dibs on here I'll take em' as they are posted when I get back.


sorry CamaroRacing12, Ted beat you to em'.

 

TTT

 

TTT Lowered a couple things.

 

up up up

 

I added the 2nd 10 bolt.

Also I added a class 3 hitch for a grand cherokee I forgot about.