Ok guys I have a custom grind predZ cam that will work perfect on a minor bolt on car with nitrous. This cam should actually love some nitrous. The specs on the cam are: 224/234 .610/.598 on a 112lsa. This thing is brand new from Comp Cam and hasn't even been removed from the plastic bag it comes in. Only looking for $325 shipped for it..

 

No interest?? Its in perfect shape and is cheap.

 

It is a XFI/XE-R grind (Comp Cam)
224/234 .610/.598 112+2 LSA
These are the valve events:
IVO>2
IVC>42
EVO>51
EVC>3
ECL>114
5* positive overlap

It will peak around 6200 and carry well to 6500/6600
It will work well with catted Y pipe, LTs or even NO Headers
Auto would benefit from small stall

Cam only with bolt ons on a healthy motor can see 400 rwhp (M6)
It has a lope a bit stronger than a TR 224 112 LSA
It will work well with nitrous and will be very DD friendly. Also although it is a 224 cam, it actualy grinds almost as a 226 and will act as a 228 cam (powerwise)

 

bump...

 

bumpidybump

 

Thanks PredZ, ya guys it would be perfect someone looking for that cam to throw in their DD and have loads of power.

 

I may be interested once I get my next paycheck, until then here is a free bump.

 

predZ, is this the same one you told me about ??

if so, i'm IN !!!

 

Yeap, that is the one, it would be real nice for you. It is brand new never used. Brentley, wants a bigger one for his new shortlock.

PM, Bjamick if you are interested.

 

I'm not too keen on winding my motor out (98 have **** for rod bolts, that and its an auto...) - would a 6300-6400 shift point be too early for this cam since you said it peaks at 6200 and carries to 6600?

 

Just get you a set of rod bolts for good measure. Then jsut be done with it.

 

Peaks at 6100/6200 with a LS6 intake, but 6400 shifts would still be good, If you want it to peak earlier, you can advance it another 2 degrees to 112+4, then you are in 5900/6000 peak territory.

 

pm sent

 

2nd pm sent,

i want the cam !!!

 

bump...

 

Well guys PM's have been returned, but no money has been sent yet..

 

Alright guys the cam has been SOLD.. Thanks for the interest.