1995 Camaro Z28 LT1/Auto part-out

Thread Tools
 
Search this Thread
 
Old May 8, 2008 | 08:14 AM
  #1  
herronz28's Avatar
Thread Starter
Launching!
iTrader: (12)
 
Joined: Nov 2004
Posts: 247
Likes: 0
From: Denton & BCS -- TEXAS!!!
Default 1995 Camaro Z28 LT1/Auto part-out

I'm parting out a 1995 Camaro Z28 350 V8 LT1 with an automatic transmission. I have all the parts, if you are needing something/looking for something please email me. I will let you set the price, as long as it is fair. PLEASE READ ALL OF THE INFORMATION BEFORE ASKING QUESTIONS!! I AM TRYING TO BE AS DETAILED AS POSSIBLE WITH TYPICALLY NEEDED PARTS. I will try to put pictures of the car and parts up soon, but I have two jobs outside of this little project. Please be patient. Pictures will eventually be found at http://picasaweb.google.com/herronz28/1995Z28ForSale

INTERIOR

As of right now I have ALL of the interior out. I DO have the dash pad, but it has one crack in it. The crack is on the passenger side. It still fits in nicely, and the crack could be controlled with some black duct tape underneath. The car had cloth seats, in decent shape. The carpet is filthy, but no tears. I have all the interior wiring, both airbags (undeployed), center console is broken in usual spot, hatch struts work just fine. I have the rest of the dash out with the frame behind it.

SS SPOILER

The car has an aftermarket SS style spoiler. I cannot find out who made it, but it is 96-97 SS style (without the two posts like LS1) but it flips higher than my 97 SS spoiler. I will sell that WITH a trade of yours plus $150. It comes with the third light as well.

EXTERIOR

I have NO BODY PARTS to sell. I am selling the car as a rolling chassis when all the other stuff is gone. Please don't ask for bumpers, taillights (unless you want to trade your 97+ style and I will trade you my 93-96 style plus harness....then we can work something out). I will sell the headlights, fog lights, and support bar for the headlights as they are already gone from the car. I will trade the tinted t-tops for dot matrix plus $100. I will even switch the locks for you so the new style t-tops will work with your original key.

MOTOR/TRANSMISSION

As of now, the LT1 motor and 4L60E transmission are not pulled. The problem is that I do not have an engine hoist. If you have one, come help me pull them and we can work out a deal for the combo, or motor alone. I'm flexible on price, just be fair is all I ask. Everything works, and I was told the transmission was rebuilt (with the LT1 aluminum heads) last summer.

All proceeds are going to help my church expand, I'm not trying to make a living doing this. Just please be fair with your offers and I will work with you. You can email me at carparter@gmail.com
Reply
Old May 8, 2008 | 08:54 AM
  #2  
speedracer2536's Avatar
TECH Resident
iTrader: (15)
 
Joined: Dec 2007
Posts: 751
Likes: 0
Default

pics of the ss spoiler.
Reply
Old May 8, 2008 | 09:07 AM
  #3  
herronz28's Avatar
Thread Starter
Launching!
iTrader: (12)
 
Joined: Nov 2004
Posts: 247
Likes: 0
From: Denton & BCS -- TEXAS!!!
Default

Its black. i'm working on pics. Check the link above in 20 minutes.
Reply
Old May 8, 2008 | 09:36 AM
  #4  
herronz28's Avatar
Thread Starter
Launching!
iTrader: (12)
 
Joined: Nov 2004
Posts: 247
Likes: 0
From: Denton & BCS -- TEXAS!!!
Default

http://picasaweb.google.com/herronz28/1995Z28ForSale

Let me know what you think of the spoiler and if you know what brand it is. Thanks!
Reply
Old May 8, 2008 | 09:43 AM
  #5  
1970judge's Avatar
TECH Fanatic
iTrader: (12)
 
Joined: Oct 2004
Posts: 1,129
Likes: 0
From: Republic of Tx
Default

If you decide to part out the engine, let me know, I will take the heads and intake.
Reply
Old May 8, 2008 | 09:44 AM
  #6  
irbs's Avatar
TECH Resident
iTrader: (7)
 
Joined: Sep 2005
Posts: 883
Likes: 0
From: DFW, Texas
Default

Originally Posted by herronz28
Its black. i'm working on pics. Check the link above in 20 minutes.
I will take the spoiler. So you want a stock spoiler and $150?
Reply
Old May 8, 2008 | 09:45 AM
  #7  
herronz28's Avatar
Thread Starter
Launching!
iTrader: (12)
 
Joined: Nov 2004
Posts: 247
Likes: 0
From: Denton & BCS -- TEXAS!!!
Default

If I can get enough people to want enough stuff, I'll do that.

Actually, I've got an intake for you. Just come pick it up! We'll call it even with the headers a while back. I've got a 94-95 and a 96-97 intake. I'll be in Denton tonight if you'd rather come get it there.
Reply
Old May 8, 2008 | 09:55 AM
  #8  
1970judge's Avatar
TECH Fanatic
iTrader: (12)
 
Joined: Oct 2004
Posts: 1,129
Likes: 0
From: Republic of Tx
Default

Awesome man, give me a call at the shop, for directions. I can meet you somewhere off 35 or something!

-Marcus
Reply
Old May 8, 2008 | 09:56 AM
  #9  
herronz28's Avatar
Thread Starter
Launching!
iTrader: (12)
 
Joined: Nov 2004
Posts: 247
Likes: 0
From: Denton & BCS -- TEXAS!!!
Default

Originally Posted by irbs
I will take the spoiler. So you want a stock spoiler and $150?
yes, come get the spoiler, just bring your stock one. I'll need it to sell the rolling chassis at the end. Not looking to make a huge profit on this folks, throw me some offers if I don't have it listed. All money is going to my church, not my pocket. You can call me at 940.390.8559 or email me at carparter@gmail.com
Reply
Old May 8, 2008 | 10:14 AM
  #10  
1970judge's Avatar
TECH Fanatic
iTrader: (12)
 
Joined: Oct 2004
Posts: 1,129
Likes: 0
From: Republic of Tx
Default

Good talkin to ya man!
Reply
Old May 8, 2008 | 12:25 PM
  #11  
rjc1629's Avatar
On The Tree
iTrader: (8)
 
Joined: Jun 2007
Posts: 131
Likes: 0
From: DFW, TX
Default

how much for the rolling shell?
Reply
Old May 8, 2008 | 02:53 PM
  #12  
herronz28's Avatar
Thread Starter
Launching!
iTrader: (12)
 
Joined: Nov 2004
Posts: 247
Likes: 0
From: Denton & BCS -- TEXAS!!!
Default

Originally Posted by rjc1629
how much for the rolling shell?
I was thinking around $1200, but shoot me an offer and let me know if that doesn't seem fair. Also, make an offer for stuff still attached to it. I'd sell the whole thing as is for very cheap. LMK
Reply
Old May 8, 2008 | 03:08 PM
  #13  
rjc1629's Avatar
On The Tree
iTrader: (8)
 
Joined: Jun 2007
Posts: 131
Likes: 0
From: DFW, TX
Default

I sent you an email.
Reply
Old May 8, 2008 | 04:45 PM
  #14  
AGRV8D's Avatar
TECH Fanatic
iTrader: (19)
 
Joined: Jul 2003
Posts: 1,653
Likes: 1
From: H
Default

how much for motor tranny and harness?
Reply
Old May 8, 2008 | 05:16 PM
  #15  
irbs's Avatar
TECH Resident
iTrader: (7)
 
Joined: Sep 2005
Posts: 883
Likes: 0
From: DFW, Texas
Default

I'm on my way to pick up the spoiler.
Reply
Old May 8, 2008 | 05:57 PM
  #16  
irbs's Avatar
TECH Resident
iTrader: (7)
 
Joined: Sep 2005
Posts: 883
Likes: 0
From: DFW, Texas
Default

spoiler is sold. Thanks jeremy.
Reply
Old May 9, 2008 | 06:01 AM
  #17  
herronz28's Avatar
Thread Starter
Launching!
iTrader: (12)
 
Joined: Nov 2004
Posts: 247
Likes: 0
From: Denton & BCS -- TEXAS!!!
Default

no problem, enjoy the new look!
Reply
Old May 9, 2008 | 06:03 AM
  #18  
herronz28's Avatar
Thread Starter
Launching!
iTrader: (12)
 
Joined: Nov 2004
Posts: 247
Likes: 0
From: Denton & BCS -- TEXAS!!!
Default

Originally Posted by AGRV8D
how much for motor tranny and harness?
I've got someone in line for the motor at $750, the transmission for $400 and the wiring harness was crap when I got it. Looked like a two year old with scissors played under the hood.....

What's an LT1/auto bringing in these days anyway?
Reply
Old May 9, 2008 | 08:49 AM
  #19  
1970judge's Avatar
TECH Fanatic
iTrader: (12)
 
Joined: Oct 2004
Posts: 1,129
Likes: 0
From: Republic of Tx
Default

Thanks Jeremy for that Intake!
Reply




All times are GMT -5. The time now is 06:44 PM.