The car and I are in Austin. Some other stock parts are in houston though (listed with description).

I do not want to mess with shipping, if you want to have a part shipped, buyer will pay the actual shipping cost.

If I dont answer something in your PM, send another one with a note in the title or something. Keeping all the quotes in PMs helps a lot with my communication!!

Aftermarket Mods:

Engine
-LS6 intake (painted black) -300
-Ported TB with bump stop mod - 80 SOLD
-SJM linelock, front mount – 80
-Racetronix fuel pump with hardwire kit ~30k mi? – 100
-Odyssey PC680 lightweight battery with mounting bracket, probably needs recharge, good in normal weather, weak in the cold. I DD with it, but probably best to just swap for the track - 40

LS1 Engine
strong running engine! 72k mi.
Cam swap: F14 cam, chromolly pushrods, PRC dual valve springs, Ti retainers, ported LS6 oil pump, LS2 timing chain (these mods have been on for ~25k mi.) has been sprayed some, about 2-3 bottles usually up to 100 shot
Burns a little bit of oil but it’s mostly due to the LS1 PCV system sucking in vapor (intake gets oily).
I have the PCM, and wiring harness for my car also. -PENDING PCM/harness

Shortblock (ported LS6 pump, LS2 chain, 160* stat., no cam) - 600
stock 853 heads attached to shortblock - 100
F14 cam (have card specs upon request) - 250
7.40" chromoly pushrods - 50, PRC dual springs w/ Ti retainers - 80


Interior
-Custom Harness bar, mounts to rear seat belt bolts, for bolt-in belts (see pics) – 90

Drivetrain
-1LE aluminum driveshaft, 1350 rear u-joint, noticed a vibration at high speeds - 60

-T56, with SixSpeedsInc stage 1 kit (http://0174de9.netsolstores.com/inde...PROD&ProdID=12 ) added new bearings also. 1 yr warranty, rated to 700hp. Rebuilt on 1-4-08 and drove just less than 2k miles since. – 2000 obo

Suspension
-Eibach Pro Kit lowering springs – 100 SOLD
-UMI torque arm, tunnel chassis mount, adjustable, paint worn slightly where it ‘massaged’ my tunnel and also scraped the ground, RED - 300 PENDING

Body/tires
-Chrome ZR1s, 17x9.5 front and 17x11 rear. Sumitumo 255/45/17 with ~70% left on the front. Very new (<200mi) Nitto Drag Radials (315/35/17) on back which have lifetime road hazard/rotations @ Discount. Rims have some curb rash but shine great and look good. - 900

-Berger panel (onyx black) with CAMARO stainless steel inserts + stock black Z28 emblem - 100
-1969 Z28 emblems (2) one is broke in half (you have to bend them flat) but when you mount it you cannot tell (pictured below is the broken one!) – 50
-Stock wheels with Hoosier street tires. Tires are kind of old but have ~40% depth left - 150 obo
-ET streets on firebird rims (with rim screws) maybe 20% left? – 80 SOLD
- Bald 315/35/17 Nitto DRs and also Sumitumo 315/35/17 street tires. Zero tread depth at center but still should have a spare tire life left. (2 tires for each brand) – 10/piece Nittos SOLD

Cracked Sunoco hood - SOLD


--------------------------------------------------------------------------


Stock Parts, Part-it-out!!!
99 Z28 with: 6 speed, T-Tops, monsoon sound, Hurst shifter…

Shift boot + hurst **** - SOLD
Tan interior, plastic-carpet-headliner -SOLD
Rear bumper - SOLD
Driver-side plastic triangle piece that covers side mirror - SOLD

The front end is damaged about up to the radiator, with the frame/bumper-support bent in some.
I cannot possibly list every part FS, but it is ALL FOR SALE!
Because I cannot anticipate which parts or combo’s people want, just reply with the parts wanted and make a good offer. I will let you know any specific info about the parts and we can reach a decision

rear lights film-blacked-out - 60
tan leather door panels - 80
monsoon CD player, security locked I believe (Houston)– 40
factory exhaust: manifolds, cats, Ypipe (Houston)- 200
tan leather seats with belts (power drivers side and rear seats): power drivers has a 5” tear in bottom, some wear, winkles etc – 120
passenger side fog light, bracket etc – 10
stock torque arm(HOUSTON) - 20
spare stock clutch, PP and flywheel (slipped) - 70
rear window with 5% tint, ls1tech.com sticker, and 4 years worth of 100 club stickers - ?

6-speed clutch-pedals, master, slave …
complete AC system, heater…
windshield, windows, motors, doors, body panels, dash, console, etc…
…just ask!

 

RR

RF Notice the penny!

LF

LR






used ET streets

 

bracket requires drilling holes into stock battery platform

 

has the prokit came up for sale yet or is it still waiting to be picked up

 

Pm sent.

 

it is still waiting to be picked up

 

tan 'leather' door panels - 100

 

how much for the battery? dont need the mount just gonna use it for a second inline battery in my TBSS

 

Lightweight battery is now pending sale with another guy

 

Springs are sold!

(I still have my stock ones though fyi!)

 

TTT

Nodybody needs better traction? 315 drag radials work good!

 

do you have the dash and if you do how much

 

how much for just the ZR1's? can you leave the rear seats in with that harness bar?

 

I dont want to sell just the rims, need to get rid of everything.
You could leave the seats in, but not use the belts. It would be unsafe for rear passengers as they could hit their head on the bar. For looks though, it would work.

 

will the motor be complete w/ accesories?

 

I took the AC compressor off to sell seperately, might do the same w/ the alternator if anybody wants it. Ill include everything with the motor for just a little extra though.

 

pm sent

 

oh ****, what you looking into jon

 

Why didnt you answer my pm.?

 

Sorry I must have forgotten to reply; its hard to keep track of everybody.
Checking back, one reason I probably didnt reply right away is because you were asking for a shipping quote, and I wrote at the top of this thread: "I do not want to mess with shipping"
I will ship some parts, but I have a busy schedule and Im not sure when I can ship it.