Below are some Misc LT1 parts I have for sale. Prices DO NOT include Shipping! Acceptable payment methods are Paypal, Checks or MO.

LT1 Computer & Engine wiring Harness $250





Stock LT1 Intake 63k miles $75




Stock LT1 Accessory Bracket & Stock LT1 Starter Both with about 63k miles $20 Each


Stock 97 LT1 Crank Hub $15 OBO


Stock Intake Elbow, Stock 140 amp Alternator w/ March Overdrive pulley, Stock de-screened 97 LT1 MAF $30 elbow, $45 Alternator, $65MAF OBO



Stock AC Compressor & Power steering pump w/ reservoir Both with 63k both in good working order when removed.
$40 each

 

Stock LT1 fuel rail $35

Modified & Polished fuel rails for a LT1 they were modified to accept -8AN fuel lines. $110



Stock Center-bolt valve covers for a LT1 but will work on any SBC head requiring center-bolt valve covers. $25


LT1 ABS Brake Control Module working when removed $100


Factory Hydraulic roller cam Spider plate with lifter retainers & cam thrust plate. $30 Shipped


Factory Belt Tensioner w/ Pulley $25 Shipped


Factory LT1 Oil Pump Drive $50 Shipped


Thanks for looking.

 

Still have the intake??

How much shipped to MD, 20653

 

Pm you about bracket and alternator. Erie Pa 16510

 

PM sent

 

Intake is still for sale

All Pm's Have been returned!

Thanks

 

Ill take the alternator and bracket. What is your Paypal addy?

 

Payment sent!

 

AC Compressor, bracket & Alternator SOLD!!!

 

Bump, stuff still for sale.

 

if the elbow is in good shape ill take it, like no rips or tears and nothing like that....drop me a PM if it is

 

Elbow is in excellent shape, pm sent

 

Bump Items still for sale.

 

Elbow still available? $30 shipped to ohio? paypal address please

 

Did the other guy buy the intake? And can you guarantee it isnt warped? How much shipped to 98802?

 

No the intake is still for sale. As far as being warped it should not I ran it on my car and had no leaks of any kind. I switched to a ported intake when I swapped in a Gm847 cam and other bolt on's.

It looks bad in the pics because I used some Engine Degreaser and hot water and cleaned it up before putting it up for sale but I can tell you it worked with no issues when I had it installed so there should be no reason why it would work now.

 

Do you still have the belt tensioner? I need one ASAP

 

Would you consider separating the engine harness and computer? I might end up needing the harness. Also what year is this from?

 

Yes, Can sepearate the harness from the computer. The car it came from is the one in my sig 97 Z28

 

Still Have The Modified Fuel Rails?