FS: MTI TB, Ebony Seat covers, Amp rack, 10” Sub enclosure
Thread Starter
On The Tree
iTrader: (13)
Joined: Dec 2003
Posts: 169
Likes: 0
From: Katy/Cypress/Pearland, Texas Bitches!
I’m beefing up my SS…Finally!
Will consider delivery if local, I’m in Katy/Pearland area. Buyer pays shipping and Pay Pal 3%. Unless specified.
NEW PRICES!
MTI TB- Shiney! bolts directly to stock, LS6 or the new FAST 78mm intake manifold. I bit dirty underneath but it is not noticeable once installed.
$275 Get the power increase at a BIG discount1



Seat Covers- SOLD!
Amp Rack – New never installed.
$40

10” sub enclosure (driver side)
I bought this off a member here but I never used it. It has a small “breach” in the inside, absolutely not an issue.
$65



Monsoon Head unit
No more than 5,000 miles before I took it out and put it on the shelf. It's been collecting dust ever since.
$80
Will consider delivery if local, I’m in Katy/Pearland area. Buyer pays shipping and Pay Pal 3%. Unless specified.
NEW PRICES!
MTI TB- Shiney! bolts directly to stock, LS6 or the new FAST 78mm intake manifold. I bit dirty underneath but it is not noticeable once installed.
$275 Get the power increase at a BIG discount1
Seat Covers- SOLD!
Amp Rack – New never installed.
$40
10” sub enclosure (driver side)
I bought this off a member here but I never used it. It has a small “breach” in the inside, absolutely not an issue.
$65
Monsoon Head unit
No more than 5,000 miles before I took it out and put it on the shelf. It's been collecting dust ever since.
$80
Last edited by Blackfly; Jun 2, 2008 at 10:43 PM. Reason: NEW PRICES
Thread Starter
On The Tree
iTrader: (13)
Joined: Dec 2003
Posts: 169
Likes: 0
From: Katy/Cypress/Pearland, Texas Bitches!
I will consider a REASONABLE offer.
Trending Topics
Thread Starter
On The Tree
iTrader: (13)
Joined: Dec 2003
Posts: 169
Likes: 0
From: Katy/Cypress/Pearland, Texas Bitches!
Thread Starter
On The Tree
iTrader: (13)
Joined: Dec 2003
Posts: 169
Likes: 0
From: Katy/Cypress/Pearland, Texas Bitches!
I custom made this. I made about 4 patterns before I got it right. After that I made one for me and my friend. It works flawlessly. My design does not get in the way of the T-tops. We mounted 2 amps and a capacitor to this design with no issues.



