FS...FMS F-11 cam,Patriot golds,heads...
05-13-2008, 09:37 AM
#1
On The Tree
Thread Starter
iTrader: (9)
Join Date: Mar 2007
Location: Orlando,FL
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
FS...FMS F-11 cam,Patriot golds,heads... Cam has less than 1500 miles on it.($150)
Heads are #241 w/40000 miles.
Patriot gold spring kit has less than 1900 miles and
are on the heads.I prefer to sell the heads and springs as a whole.
($200)
Local pickup prices only.
These parts are off 02ss.
FMS-F11-114 FMS Custom Grind Camshaft - 228"/230" .576"/.595" 114LSA - aggressive profile with a 2200-6600 RPM range, fair idle
Heads are #241 w/40000 miles.
Patriot gold spring kit has less than 1900 miles and
are on the heads.I prefer to sell the heads and springs as a whole.
($200)
Local pickup prices only.
These parts are off 02ss.
FMS-F11-114 FMS Custom Grind Camshaft - 228"/230" .576"/.595" 114LSA - aggressive profile with a 2200-6600 RPM range, fair idle
05-13-2008, 07:45 PM
#5
On The Tree
iTrader: (3)
Join Date: May 2003
Location: Deltona Florida
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
I'm interested in the cam, but I'm on the fence cause I was going to get headers first..... So i'm 50/50
why did you pull it out of the car? do you have the cam card (I think that's what it's called.)
Damn car parts, I want too many things right now and this stimulus check is burning a whole in my pocket.....
why did you pull it out of the car? do you have the cam card (I think that's what it's called.)
Damn car parts, I want too many things right now and this stimulus check is burning a whole in my pocket.....
05-13-2008, 08:47 PM
#6
On The Tree
Thread Starter
iTrader: (9)
Join Date: Mar 2007
Location: Orlando,FL
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
I'm interested in the cam, but I'm on the fence cause I was going to get headers first..... So i'm 50/50
why did you pull it out of the car? do you have the cam card (I think that's what it's called.)
Damn car parts, I want too many things right now and this stimulus check is burning a whole in my pocket.....
why did you pull it out of the car? do you have the cam card (I think that's what it's called.)
Damn car parts, I want too many things right now and this stimulus check is burning a whole in my pocket.....
And installing a set of TEA 5.3 heads.I haven't any complaints about
it,I think it would of been mean w/the new heads.I would not put it
in without springs though.
I do still have the cam card and oiginal box.
Parts are at Mike Norris' shop,I'll be picking them up around Thursday.
For the package deal,you could not even buy the cam alone new
Thanks.
Brian
05-13-2008, 08:47 PM
#7
TECH Apprentice
iTrader: (7)
Join Date: Jun 2006
Location: Deltona, FL
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Jason,
Futral does not have cam cards per se. That should be a nice streetable cam. I like a little more aggressive profile, but for the right deal.....sacrificing some top end...... My pick is the F13 114LSA for you, but they are really close.
FYI those are the springs you want..... Part out what you need and and don't? Another good deal.....
Futral does not have cam cards per se. That should be a nice streetable cam. I like a little more aggressive profile, but for the right deal.....sacrificing some top end...... My pick is the F13 114LSA for you, but they are really close.
FYI those are the springs you want..... Part out what you need and and don't? Another good deal.....
Trending Topics
05-13-2008, 08:51 PM
#8
TECH Fanatic
iTrader: (23)
Join Date: Feb 2008
Location: Los Angeles, CA
Posts: 1,839
Likes: 0
Received 0 Likes
on
0 Posts
get me a price on the cam shipped to 91345 pls ands your paypal, i know you said local but doesnt hurt to ask
Last edited by Raptor_WS6; 05-13-2008 at 09:16 PM.
05-13-2008, 09:10 PM
#9
TECH Apprentice
iTrader: (19)
Join Date: May 2007
Location: Deland, FL
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Mike and Jason, for $150 and as easy as it is to swap a cam, I would give it a try. You will need springs though Jason. Get yourself some less expensive headers and do the cam and a converter too.
05-13-2008, 09:15 PM
#10
On The Tree
iTrader: (3)
Join Date: May 2003
Location: Deltona Florida
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Brian, I am 99% sure that I'm going to buy the cam, please give me until tomorrow morning. I work in Winter Park and I can pick it up wherever you want to meet. I just have to figure out the mod part, plus with Mike and John saying go for it (They aren't helping dissuade me by the way) that is what has swung me towards getting it from you.
Thanks Mike for the clarification
John, I hear ya on the cheaper parts, plus I'm hearing things about the HVMC on the QTP's and welding issues.
Thanks Mike for the clarification
John, I hear ya on the cheaper parts, plus I'm hearing things about the HVMC on the QTP's and welding issues.
05-13-2008, 09:32 PM
#11
On The Tree
Thread Starter
iTrader: (9)
Join Date: Mar 2007
Location: Orlando,FL
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Brian, I am 99% sure that I'm going to buy the cam, please give me until tomorrow morning. I work in Winter Park and I can pick it up wherever you want to meet. I just have to figure out the mod part, plus with Mike and John saying go for it (They aren't helping dissuade me by the way) that is what has swung me towards getting it from you.
I work at 50 and 17-92 so we can meet up.
05-13-2008, 10:06 PM
#13
On The Tree
iTrader: (3)
Join Date: May 2003
Location: Deltona Florida
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Okay, I want the cam and springs. Is there anyway to separate them from teh heads? I don't need or want the heads. Let me know when we can meet, I will pay you in cash, so consider them sold. I work Mon - Fri's at 436 and Howell Branch road basically, from 6:00 am until 2 pm but Friday it's til noon, so around those times i will be able to get them.
How much for just the cam and springs if you'll separate them.
How much for just the cam and springs if you'll separate them.
05-13-2008, 10:33 PM
#14
On The Tree
Thread Starter
iTrader: (9)
Join Date: Mar 2007
Location: Orlando,FL
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Okay, I want the cam and springs. Is there anyway to separate them from teh heads? I don't need or want the heads. Let me know when we can meet, I will pay you in cash, so consider them sold. I work Mon - Fri's at 436 and Howell Branch road basically, from 6:00 am until 2 pm but Friday it's til noon, so around those times i will be able to get them.
How much for just the cam and springs if you'll separate them.
How much for just the cam and springs if you'll separate them.
the springs.I rather them go together.
05-14-2008, 04:39 AM
#15
On The Tree
iTrader: (3)
Join Date: May 2003
Location: Deltona Florida
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
it was worth a shot. Okay $350 for the heads, springs, and cam? And I'm not in a hurry, so whenever you get the parts, let me know and I'll get you the money. Money is available now though if your in need to unload parts quick.
