I have a NANO kit that I have used one bottle of and I need to sell. I bought the kit for my birthday 3/29 of this year from Nitrous Outlet. I have since bought twin turbos and no longer have need for my nitrous system.

 

Your thread reads wrong. So its not new.

 

My fault it has been hooked up and one bottle was used. Considering that and the fact it is $569 on their website a $79 discount seems more than enough!

 

Good price for those not wanting to group purchase!

 

Thanks

 

BUMPT TTT, I have heard they will soon be on backorder

 

Which nano kit do you have? Is it the one for a 10lb or 15lb bottle? Is it the competition nano and how did you like it for the one bottle you used it for? Sorry for all the questions but I am interested.

 

It is the 10lb here is the direct link
http://www.nitrousoutlet.com/catalog...roduct_id=2870
http://www.nitrousoutlet.com/images....roduct&id=2870

If I had not bought this GENT TTR I would have never sold the unit. Being able to run constant ET without having to worry if the bottle is heated enough and that at the end of the track the pressure will drop on a larger shot. With this kit you dont have those problems. I am still keeping my nitrous just going to use a 50 to cool intake temps and get me off the line then it will turn off during full spool

 

Ttt Bump

 

Is there anyway to modify the valve to the Superflo valve so it will support over 200hp on the spray? If so you will have a sale if its availble Tuesday.

 

I was unsure of the answer so I called Nitro Daves and talked with Ray. I have nitrous outlets' kit witch required an updated 45 degree valve. He said it will suppoort 300hp. If you need to go to 500 he said give him a call and he will get you an adapter.

 

That is correct....the Universal NANO when paired with a NX 45* valve will support 300hp...if you need more all you have to do is get the NOS Super Hi-Flo valve , and it will support up to 500HP

The NANO check valves are a 1/4NPT fitting. The Universal kit use a 1/4NPT to 1/8NPT reducer to adapt to a 1/8 NPT pressure port. The NOS Super Hi-Flo uses a 1/4NPT pressure port. This is why you need the NOS valve to handle large than a 300 shot. The reducer will become a restriction above 300 hp.

 

Thanks for chiming in Ray

 

ok cool. So the kit is already set up to handle the 300hp shot. That is correct right? If so I will be contacting you Tueday if nothing goes wrong.

 

That would be correct, they are the experts and the ones who sold it to me so they would know.

 

Just send me a PM an I will give you my Paypal address Unless you want to send a cashiers check.

 

I will be sending you a postal moneyorder if that's ok with you. I will pm you with my contact info.

 

If you want to pay the fee that is quite all right. I will send the kit when it comes in.

 

Sold!!