Lunati Rods and Forced Induction Diamond Pistons
Thread Starter
Joined: Jul 2007
Posts: 80
Likes: 1
From: Overland Park, KS
Lunati Rods and Forced Induction Diamond Pistons Lunati Pro-Mod Connecting Rods, LS1 Engine, 6.125" ROD LENGTH, .927 WRIST PIN, 2.100 CRANK PIN, .940 JRNL WIDTH (Includes ARP Connecting Rod Bolts)
http://www.thunderracing.com/catalog...vid=9&pcid=120
Diamond Pistons LS1 Forged Dished Piston set w/ -8.6cc Valve Reliefs, 3.905" BORE / 3.622" Stroke / 6.125" Rods / 1.314" Comp Height / .927 x 2.500 Wrist Pins Included
http://www.thunderracing.com/catalog...mid=35&sid=745
$800 for rods and pistons together or $400 for set of rods, $400 for set of pistons(with wrist pins). I do not know what the mileage was.. I do know that it was a daily driver with a turbo and around 10 lbs...
More pics available upon request!
I do not post on LS1 tech that much but if you wish to see more of me, I am on ws6zxr.com under the same SN!
TIA!
Before pulling out of the block:
After:
http://www.thunderracing.com/catalog...vid=9&pcid=120
Diamond Pistons LS1 Forged Dished Piston set w/ -8.6cc Valve Reliefs, 3.905" BORE / 3.622" Stroke / 6.125" Rods / 1.314" Comp Height / .927 x 2.500 Wrist Pins Included
http://www.thunderracing.com/catalog...mid=35&sid=745
$800 for rods and pistons together or $400 for set of rods, $400 for set of pistons(with wrist pins). I do not know what the mileage was.. I do know that it was a daily driver with a turbo and around 10 lbs...
More pics available upon request!
I do not post on LS1 tech that much but if you wish to see more of me, I am on ws6zxr.com under the same SN!
TIA!
Before pulling out of the block:
After:
Last edited by 85mcss; May 29, 2008 at 10:26 AM.
Thread Starter
Joined: Jul 2007
Posts: 80
Likes: 1
From: Overland Park, KS
Trending Topics
Thread Starter
Joined: Jul 2007
Posts: 80
Likes: 1
From: Overland Park, KS
nope, thats just part of the forging
ttt!
I assure you that these would make an awesome build.. I bought them to build a FI Lsx but ended up finishing my Gen 1 FI sbc:
http://media.putfile.com/sort-idlerev-vid-of-the-monte
ttt!
I assure you that these would make an awesome build.. I bought them to build a FI Lsx but ended up finishing my Gen 1 FI sbc:
http://media.putfile.com/sort-idlerev-vid-of-the-monte
Last edited by 85mcss; Jun 2, 2008 at 02:53 PM.
Man, I cannot believe these haven't been picked up by someone yet. This is a very good price man. Especially for the minimal mileage on them.
Also anyone interested can shoot me a PM & I can get ahold of Brandon anytime. I have the block & crank these came out of for my N/A build.
Also anyone interested can shoot me a PM & I can get ahold of Brandon anytime. I have the block & crank these came out of for my N/A build.
Last edited by BIG_MIKE2005; Jun 3, 2008 at 08:19 AM.
It was a friend of ours motor & I believe it was only together for about 10k miles tops. And alot of those miles came from him driving back & fourth to LG motorsports from up here in Tulsa, so alot of highway miles.
