Custon NX LSX Direct Port w/ NXL Nozzles
Thread Starter
12 Second Club
iTrader: (33)
Joined: Jan 2005
Posts: 2,584
Likes: 0
From: winter springs, fl
Custon NX LSX Direct Port w/ NXL Nozzles It comes with everything you need to run it, except a relay which are 25 bucks from nitro dave's. Here is a basic parts list:
.125 Orifice Lightning Solenoid (N)-$146 New
.310 Orifice Lightning Solenoid (F)-$146
.063 Orifice Lightning Solenoid (purge)-$120
NX NXL Nozzles x8-$104 each-ouch-Also, NXL nozzles mount in the injector bosses, so you won't need to drill/tap your expensive ported intakes
NX distribution block-$75
16 feed tubes-$75
NX TPS Switch-120
10# NX bottle-$220
main,nitrous/fuel feed lines-$150
16 jets for 100 shot-5 bucks a jet=80 bucks
Lots of brackets and fittings to tie everything together-$$$
+labor or time bending the lines
im sure there are a few small things im forgetting, and while this stuff isnt new, its in very very nice condition-the fittings have almost no marks on them and the fuel solenoid does not smell of gas.I got it from a member here, he said he got it at cost from a friend who was a nx dealer. Im looking for about 1100 shipped but can be a little flexable on the price as i've just bought some hotparts and just want to get my money back from those.
.125 Orifice Lightning Solenoid (N)-$146 New
.310 Orifice Lightning Solenoid (F)-$146
.063 Orifice Lightning Solenoid (purge)-$120
NX NXL Nozzles x8-$104 each-ouch-Also, NXL nozzles mount in the injector bosses, so you won't need to drill/tap your expensive ported intakes
NX distribution block-$75
16 feed tubes-$75
NX TPS Switch-120
10# NX bottle-$220
main,nitrous/fuel feed lines-$150
16 jets for 100 shot-5 bucks a jet=80 bucks
Lots of brackets and fittings to tie everything together-$$$
+labor or time bending the lines
im sure there are a few small things im forgetting, and while this stuff isnt new, its in very very nice condition-the fittings have almost no marks on them and the fuel solenoid does not smell of gas.I got it from a member here, he said he got it at cost from a friend who was a nx dealer. Im looking for about 1100 shipped but can be a little flexable on the price as i've just bought some hotparts and just want to get my money back from those.
Last edited by Hennytime; Jul 14, 2008 at 10:36 AM.
