NEW IN BOX Patriot Heads
Thread Starter
TECH Apprentice
iTrader: (45)
Joined: Jan 2006
Posts: 387
Likes: 0
From: SS Indianapolis, IN
These are the stage 2 LS6 heads. 2.02/1.57 valves, 227cc intake runner, and Patriot Extreme Gold Dual Springs (.650 lift). They have been milled .025 (by Patriot) to bring the compression up. That should make it a 59cc combustion chamber.
They flowed well over 300cfm @ .600.
They are BRAND NEW STILL IN THE BOX. Last I heard, Patriot is almost 5 weeks out on heads at the moment. You won't have to wait that long.
I can get pics, but lets face it, heads are heads, seen one set you've seen them all.
Sold to jhall. Payment received 6/16
They flowed well over 300cfm @ .600.
They are BRAND NEW STILL IN THE BOX. Last I heard, Patriot is almost 5 weeks out on heads at the moment. You won't have to wait that long.
I can get pics, but lets face it, heads are heads, seen one set you've seen them all.

Sold to jhall. Payment received 6/16
Last edited by TheBiz; Jun 16, 2008 at 06:51 PM.
Thread Starter
TECH Apprentice
iTrader: (45)
Joined: Jan 2006
Posts: 387
Likes: 0
From: SS Indianapolis, IN
i have a ZEX direct port no2 system new in the box, plus a few other bolt on that in combination i was hoping to trade for a new set of heads.
the other parts i have are ls6 intake, asp pulley with new crank bolt, slp fan switch, stock ported TB, granetelli maf, and probably a couple other things im forgetting about.
the other parts i have are ls6 intake, asp pulley with new crank bolt, slp fan switch, stock ported TB, granetelli maf, and probably a couple other things im forgetting about.
Thread Starter
TECH Apprentice
iTrader: (45)
Joined: Jan 2006
Posts: 387
Likes: 0
From: SS Indianapolis, IN
i have a ZEX direct port no2 system new in the box, plus a few other bolt on that in combination i was hoping to trade for a new set of heads.
the other parts i have are ls6 intake, asp pulley with new crank bolt, slp fan switch, stock ported TB, granetelli maf, and probably a couple other things im forgetting about.
the other parts i have are ls6 intake, asp pulley with new crank bolt, slp fan switch, stock ported TB, granetelli maf, and probably a couple other things im forgetting about.
Trending Topics
Thread Starter
TECH Apprentice
iTrader: (45)
Joined: Jan 2006
Posts: 387
Likes: 0
From: SS Indianapolis, IN


Thread hijacker!