LS6 CNC heads, Cam, etc.

 
Thread Tools
 
Search this Thread
 
Old Jun 22, 2008 | 07:44 PM
  #1  
JohnDaMan's Avatar
Thread Starter
Staging Lane
iTrader: (7)
 
Joined: Nov 2006
Posts: 70
Likes: 0
From: Sumter, SC
Default LS6 CNC heads, Cam, etc.

This is what I have up for sale:

Stage II LS6 Livernois Heads (306/235 CFM) - Brand new still in bags with build tags. These are a very nice set of heads with .690" lift springs and small 220cc runners to maintain runner velocity. $1399 New @ Livernois. Buy mine for $1200 shipped or $1150 pick-up.
SOLD
Lingenfelter GT-11 cam - Specs on the cam are 215/231 .631/.644 on a 118 Centerline. This is very similar to Thunder Racing's CheaTR cam. It is used but has less than 5k miles on it. $200 Shipped or $180 picked up. SOLD

Pushrods - 7.425" length brand new in the package. $70 shipped or $60 picked up.

Cometic head gaskets - .040" head gasket for the LS2. $120 shipped or $110 picked up. SOLD

ARP head bolts - Brand new in the box for the 2004+ LS Engines. $90 Shipped or $80 picked up. SOLD

Gaskets needed for cam swap - SOLD


Feel free to PM me with any questions. Located in South Carolina - John

Last edited by JohnDaMan; Jul 1, 2008 at 09:02 PM.
Old Jun 22, 2008 | 09:06 PM
  #2  
JohnDaMan's Avatar
Thread Starter
Staging Lane
iTrader: (7)
 
Joined: Nov 2006
Posts: 70
Likes: 0
From: Sumter, SC
Default

Open to reasonable offers too. If one wanted to buy several parts then I would knock some duckies off as well.
Old Jun 22, 2008 | 10:18 PM
  #3  
BigBlockCamaro's Avatar
Banned
iTrader: (6)
 
Joined: Apr 2008
Posts: 163
Likes: 0
From: South
Default

Interested in Gasket Package!

Also do you need the 7.425 for that cam?

IS that cam to aggressive for a stock bolt on ls1/a4 with a 4000 stall?
Old Jun 22, 2008 | 10:18 PM
  #4  
BigBlockCamaro's Avatar
Banned
iTrader: (6)
 
Joined: Apr 2008
Posts: 163
Likes: 0
From: South
Default

Also get a me a price for everything but the heads!
Old Jun 22, 2008 | 10:30 PM
  #5  
JohnDaMan's Avatar
Thread Starter
Staging Lane
iTrader: (7)
 
Joined: Nov 2006
Posts: 70
Likes: 0
From: Sumter, SC
Default

Originally Posted by BigBlockCamaro
Interested in Gasket Package!

Also do you need the 7.425 for that cam?

IS that cam to aggressive for a stock bolt on ls1/a4 with a 4000 stall?
The GT-11 cam will drive and idle like stock. It will make slightly more power than the stock cam until about 4k RPMS and then it will take off. The peak is usually around 6600-6800 RPMs I believe. It is not an aggressive cam by any means. The 7.425" pushrod should be a good choice for the cam, however you may have to verify on your motor.

If you wanted all but the heads I would ship to you for $500.
Old Jun 23, 2008 | 03:05 AM
  #6  
MLP00Z28's Avatar
On The Tree
iTrader: (4)
 
Joined: Jan 2008
Posts: 149
Likes: 1
Default

I will take the cam, PM me your paypal
Old Jun 25, 2008 | 04:43 PM
  #7  
JohnDaMan's Avatar
Thread Starter
Staging Lane
iTrader: (7)
 
Joined: Nov 2006
Posts: 70
Likes: 0
From: Sumter, SC
Default

Cam and Gaskets sold. New prices listed.
Old Jun 25, 2008 | 05:33 PM
  #8  
BigBlockCamaro's Avatar
Banned
iTrader: (6)
 
Joined: Apr 2008
Posts: 163
Likes: 0
From: South
Default

Thanks for an awesome deal on the gaskets! FIRST CLASS SELLER!

Free Bump for ya!
Old Jun 25, 2008 | 09:52 PM
  #9  
JohnDaMan's Avatar
Thread Starter
Staging Lane
iTrader: (7)
 
Joined: Nov 2006
Posts: 70
Likes: 0
From: Sumter, SC
Default

Originally Posted by BigBlockCamaro
Thanks for an awesome deal on the gaskets! FIRST CLASS SELLER!

Free Bump for ya!
Thanks! Guys all this stuff is brand new in the box at used parts prices!
Old Jun 26, 2008 | 10:32 PM
  #10  
JohnDaMan's Avatar
Thread Starter
Staging Lane
iTrader: (7)
 
Joined: Nov 2006
Posts: 70
Likes: 0
From: Sumter, SC
Default

TTT, heads and pushrods left. NEEDS TO GO!!
Old Jun 29, 2008 | 12:57 PM
  #11  
JohnDaMan's Avatar
Thread Starter
Staging Lane
iTrader: (7)
 
Joined: Nov 2006
Posts: 70
Likes: 0
From: Sumter, SC
Default

I know someone is out there looking for a set of heads! TTT!
Old Jun 29, 2008 | 02:00 PM
  #12  
LS1C5Vette's Avatar
TECH Resident
iTrader: (11)
 
Joined: Jan 2007
Posts: 836
Likes: 0
From: Oklahoma City
Default

I am, pm me your rock bottom price on the heads...Also whats the website for more info, I cant find any
Old Jun 29, 2008 | 08:46 PM
  #13  
JohnDaMan's Avatar
Thread Starter
Staging Lane
iTrader: (7)
 
Joined: Nov 2006
Posts: 70
Likes: 0
From: Sumter, SC
Default

Adding pics
Attached Thumbnails LS6 CNC heads, Cam, etc.-cnc2.jpg   LS6 CNC heads, Cam, etc.-cnc3.jpg   LS6 CNC heads, Cam, etc.-cnc4.jpg   LS6 CNC heads, Cam, etc.-cnc5.jpg   LS6 CNC heads, Cam, etc.-cnc1.jpg  

Old Jun 29, 2008 | 08:54 PM
  #14  
LS1C5Vette's Avatar
TECH Resident
iTrader: (11)
 
Joined: Jan 2007
Posts: 836
Likes: 0
From: Oklahoma City
Default

Also can I ask why you are selling these? And are they still the stock 64cc?
Old Jun 29, 2008 | 09:05 PM
  #15  
JohnDaMan's Avatar
Thread Starter
Staging Lane
iTrader: (7)
 
Joined: Nov 2006
Posts: 70
Likes: 0
From: Sumter, SC
Default

I need to sell them so I can fix the transmission in my car. I also uploaded the flow sheet on the Livernois webpage
Attached Thumbnails LS6 CNC heads, Cam, etc.-stg2.jpg  
Old Jul 1, 2008 | 09:02 PM
  #16  
JohnDaMan's Avatar
Thread Starter
Staging Lane
iTrader: (7)
 
Joined: Nov 2006
Posts: 70
Likes: 0
From: Sumter, SC
Default

Heads are sold. Pushrods left > new price
Old Jul 10, 2008 | 11:03 PM
  #17  
JohnDaMan's Avatar
Thread Starter
Staging Lane
iTrader: (7)
 
Joined: Nov 2006
Posts: 70
Likes: 0
From: Sumter, SC
Default

Pushrods still left. These are brand new in the box!!
 




All times are GMT -5. The time now is 02:50 AM.