I have to do this $10K
I have to do this $10K 99TA, Pewter, 67K, M6
The rear is a stock 10 bolt that has been beefed up as much as possible it currently has Motive Performance gear set 3.90s a TA rear Girdle and stud kit. Solid pinion spacer, Rotech install kit.
The exhaust is Pace Setter LTs coated, X-pipe to Bullet mufflers that turn down just before the rear.
Intake is a K&N filter, Induction Lid, Smooth bellow, and LS6 intake bought new from SLP.
SPEC stage 3 clutch w/ aluminum flywheel
Ford racing 30lbs red top injectors
Taylor 8mm plug wires and NGK spark plugs
Powerbond underdrive pullies
Ported high flow oil pump,Comp cams custom grind cam and valvetrain components. cam specs are a 230 236 .613 .601 112LSA
I have American racing TT 2s 17s all the way around 10.5 out back and 9s up front. Black with chrome lip.
Nitto 555’s up front and Nitto 555r’s out back with about 3/4 tread life left.
GM performance parts slave cylinder
15% window tint
All work and dyno tuning done by XXX Motor Sports.
$10K I have receipts for most everything. I also have stock wheels that will go with the car. The only reason I am putting this car up for sale is my new project which is taking more money than I thought. If you have any questions let me know. PM me or email ta350hp2000@yahoo.com
Thanks,
Eric
The rear is a stock 10 bolt that has been beefed up as much as possible it currently has Motive Performance gear set 3.90s a TA rear Girdle and stud kit. Solid pinion spacer, Rotech install kit.
The exhaust is Pace Setter LTs coated, X-pipe to Bullet mufflers that turn down just before the rear.
Intake is a K&N filter, Induction Lid, Smooth bellow, and LS6 intake bought new from SLP.
SPEC stage 3 clutch w/ aluminum flywheel
Ford racing 30lbs red top injectors
Taylor 8mm plug wires and NGK spark plugs
Powerbond underdrive pullies
Ported high flow oil pump,Comp cams custom grind cam and valvetrain components. cam specs are a 230 236 .613 .601 112LSA
I have American racing TT 2s 17s all the way around 10.5 out back and 9s up front. Black with chrome lip.
Nitto 555’s up front and Nitto 555r’s out back with about 3/4 tread life left.
GM performance parts slave cylinder
15% window tint
All work and dyno tuning done by XXX Motor Sports.
$10K I have receipts for most everything. I also have stock wheels that will go with the car. The only reason I am putting this car up for sale is my new project which is taking more money than I thought. If you have any questions let me know. PM me or email ta350hp2000@yahoo.com
Thanks,
Eric
oh well ttt for the day 
Trending Topics
The email got bounced back to me, so I sent it again and also sent you the same message via the PM system on here.
I am 99% sure I am going to buy your car, I just need you to answer some questions in the message I sent you.
Hope to here form you soon...
I am 99% sure I am going to buy your car, I just need you to answer some questions in the message I sent you.
Hope to here form you soon...
