Wolfe v-band clamps Part #: UWOLVB-4AL 5 new clamps, and 2 used loose clamps $150-Clamps Sold


4 LS1 ATI 80% asa underdrive damper hub $30/each

1 new CCI chromoly drive shaft for ls1 4l60/t56 & 10 bolt $150

 

Are the clamps the complete assembly with both rings or just the clamps.

Im interested but some more details would be great.

-Ryan

 

clamps are complete, I will get pics. 5 are brand new clamps, and 2 used that can be used for parts. These are the aluminum ones. straight from their web site: Description: V-Band Clamp assemply for use with Turbo's and Blowers intake tubing. Uses v-band clamp and 0-ring to ensure tight leak free seal. Allows quick and easy assembly and dissasembly between rounds for maintence.

 

pics up

 

to the top

 

so on those pulleys what dampener part do you need to make them a complete balancer?

 

Can you give me the length of the driveshaft alone? Will need one shortly for my '57. Also what's the diameter of the tubing?

Thanks,
Charlie

 

these will bolt to an ati shell

 

Center to center(u-joints) 42". overall length is 48". 3" tubing

 

well i need a part number or some kind of ideal what the other part cost.

 

I was told this is the one http://www.yearone.com/serverfiles/f...12AD25001&trk=

 

payment sent on the driveshaft via pay pal
-Art

 

Do you know if the hubs will fit on any other kind of pulley? The hub on my ASP pulley is damaged. If I could swap these out, I would buy one!