FS: HPE Megadeath cam
FS: HPE Megadeath cam Specs are 244/242 .612/.610 112lsa. HPE says no fly cutting required, I ran it for about a month now I'm going to another setup. It's out of the car and ready to be picked up.
My car made 436rwhp/400rwtq on stock heads with a FAST 90 setup and 1-3/4" headers through a 6 speed with 3.73s. I'd expect over 470 with a good set of heads.
$300 and come get it, looks new still. I have it lubed and wrapped up sitting in the garage right now.
My car made 436rwhp/400rwtq on stock heads with a FAST 90 setup and 1-3/4" headers through a 6 speed with 3.73s. I'd expect over 470 with a good set of heads.
$300 and come get it, looks new still. I have it lubed and wrapped up sitting in the garage right now.
I can vouch for this cam! I had one on my previous setup, I was the first GTO and probably the 2nd LS engine to get this cam. With Heads and other "full boltons" I made 480rwhp 460tq. I am now FI with twins (only reason I sold)
