Item: LS1 PRO1 205 Assembled SOLD
Material: Aluminum
Intake Port: 205cc
Chamber Volume: 62cc
Intake/Exhaust Valves: 2.02/1.60
Springs were good for .600 lift and are single springs.
Heads have right at 5K miles on them.

The pictures will come after I get to the shop and pick them up.

1150 Shipped WITH ARP head Bolts
without 1050

Please do not ask about bolts individually at this time



Kooks 1 7/8 Long Tubes for F-Body






650 + Shipping



Mac Headers and Y-Pipe

Pictures will be added after car gets out of shop. They are being removed currently. Headers are in good shape look silver, ceramic coat I believe. They have EGR and AIR provisions but I have block off plates for both. The Y pipe came with cats however they were removed and have been welded with strait pipe where cat would be. If you wanted to run cats it would be very easy switch by just cutting the "patch" out.

430+ shipping

LS7 Clutch

Clutch is used and in good condition. Comes with flywheel and looks to have pleanty of life left.






200 Shipped

Never Used Comp 987 Springs



asking 150 + Shipping

Borla Cat back with all the plates. It IS complete just didnt feel like taking the I pipe down for pictures when I had it off my car for fuel pump work. It will be off the car this week or next for shipping.



I paid 800, will sell for 450+ shipping


GM 10 bolt with LCA relocation brackets and 3 series posi with 3.42 gears.
No backing plates on the rear end.
asking _-_-_ I LIVE IN NW Florida, pick up would be much better if possible.

Built 4L60E comes with stock torque converter. The trans was built by a GM transmission Guru. I tore the transmission up and rebuilt. Now swapping to 6 speed bc I only drive on the street. Transmission upgrade parts include:
-TCI rebuild kit with new clutch packs, bands, etc
-5 pinion planetaries front and rear
-Beast Reactor Shell

The transmission will come fresh and unrun since rebuild by GM mechanic.
Looking to get 800 + Shipping

 

How about the 10 bolt carrier only? Is it a 4 channel? Would you be willing to sell just the carrier?

 

How about a package deal for the Catback and Mac LT's w/y pipe? They are Long Tubes aren't they?

 

MAC's are a mid length header

 

I would be willing to do a package deal on them however they are a midlength header. They fit really well and make a pretty good amount of power though.

 

10 Bolt is 3 channel ABS.

 

If you want to sell the head bolts I am interested, I sent you a pm from your other thread

 

B U M P

 

TTT again

 

are the kooks stainless?

 

yes, I don't think Kooks makes any headers that are not stainless?? Do they?

 

Sale pending on heads

 

Pics of macs please, baker_f72@hotmail.com

 

sent you a PM regarding relocation brackets

 

are the kooks the offroad style(no air and egr)? how many miles....shippin to 37763?

 

will have to check on these things guys, I will try to be timely.

 

How much for the trans shipped to Appomattox, VA 24522?

 

I know u stated youd like local pickup on the rear end, but its exactly what I'm looking for, if no one local comes through, what are u interested in for the 10 bolt shipped to 60445, chicago IL?

 

PM sent

 

Heads SOLD