95 6 speed PCM
Thread Starter
TECH Veteran
iTrader: (53)
Joined: Feb 2004
Posts: 4,433
Likes: 0
From: Monticello, Kentucky
$75 shipped.
Tested and running. Let the car run for a couple minutes and did not show an SES light. No bracket and unfortunately, the tag on the case is missing but that may not mean much to some of you.
Tested and running. Let the car run for a couple minutes and did not show an SES light. No bracket and unfortunately, the tag on the case is missing but that may not mean much to some of you.
Thread Starter
TECH Veteran
iTrader: (53)
Joined: Feb 2004
Posts: 4,433
Likes: 0
From: Monticello, Kentucky
Yes, 95 LT1. I guess I took it for granted that everyone would know it was an LT1, my bad. It's out of a Camaro. Price is shipped so no additional shipping charges.
Trending Topics
Just so I understand fully: After doing my swap, this is the only electronic item I'd need to install to allow the car to run/shift correctly? Just unplug the old PCM and plug this one it and that's it, no tuning?
Dumb questions, perhaps, but I have not done this before.
Dumb questions, perhaps, but I have not done this before.
Thread Starter
TECH Veteran
iTrader: (53)
Joined: Feb 2004
Posts: 4,433
Likes: 0
From: Monticello, Kentucky
You need a 6 speed harness for VSS unless you think you can splice the pigtail on. Reverse lockout would be a PITA too.
Thread Starter
TECH Veteran
iTrader: (53)
Joined: Feb 2004
Posts: 4,433
Likes: 0
From: Monticello, Kentucky
I thought Tunercats could change it??? You can buy their flasher for $20 I think and you have a 30 day free trial so long as you have a cable.


