Hey all,

I hadn't started a thread in here yet as I didn't have any cores, but now I have some. Thought you all might like to see some of my work and my very competitive pricing as well.
Full race port, along with throttle shaft halfed, etc is $65. Add another $65 and you get powdercoating in the color(s) of your choice on the throttle body itself and the cam gear, along with a polished return spring of course all for a total of $130. Exterior show polishing instead of powdercoating is available for $100. I'm trying to track down a few IAC motors for these cores so I can included a polished IAC motor. I do not epoxy the throttle body, or knife edge the blade as knife edging has been proven to cause idle issues for alot of folks. Core charge is $70.
Porting only: $65
With powdercoat: $130
Powdercoating only on any unit you send:$70
Show polished exterior: $110
Core charge: $65

Rally silver with my custom fbody NBM match on the cam gear, super gloss clear over everything



Candy/Andodized red w/mirror black cam gear




Polished exterior


Mirror Black with "near chrome" cam gear



Mirror black with mirror red cam gear






PM me if you would like to order, I'm glad to help
All my work can be seen at www.thepowderpro.com thanks

Sean

 

nice work. what temp do you bake them at so you dont warp them at all?

 

so pretty

 

Wow, they look awesome. I need to get one of these soon...I'll definitely keep you in mind when the time comes!

 

It depends on the powder but no more than 400 degrees is necessary, which obviously is well within the limits of aluminum.

I also have a few sets of brake caliper cores and maf ends here available for exchange as well

 

Bump for you. I get the feeling a lot of people missed this thread.

 

dont see t-body porting on your website..

 

interested in a show polished tb for a 02. let me know what my total would be after the core in returned?

 

im thinking about ordering one in the near future ill have to keep you in mind

 

Just ordered MAF ends and throttle body ported and powdercoated. Can't wait to get them in and on, Sean is very upfront and nice on the phone.

Free bump for you!

 

do you do 90mm's

 

there are a couple pics on his website of a 90mm

 

Yup, I do 90's, same difference to me as doing stockers.
here's a 90 next to a stock, both in mirror black


Thanks Caleb, I got your TB done today for you.

LandonZ I will PM you now..

Sean

 

mirror black with metallic gray cam gear


anodized red..


here's an unported vette unit..rally silver and pollished end

 

some ported and powder coated MAF ends, also available on core exchange on a more limited basis than my throttle bodies.
$45 for powder only, add $35 for porting.
All powdercoated units are shaved on the exterior first, and bolts are polished.

mirror red


my custom match for fbody NBM


gloss white, gloss black


just plain media blasted, pretty cool old school look

 

Nice work. Sean, I'll be dropping some more of my stuff off during the winter lol.

 

sounds good Phil. Will I have to install them this time too? LOL.

 

Lol...unfortunately not...my car will most likely be in storage by that time. I still haven't put that sensor back in lol.

 

good deal...

 

Do you powder coat LS2 90mm TB's?