In the process of rebuilding my engine now and i'm unloading everything that I no longer need to try to offset the cost a little. All prices include shipping already. If paying paypal, please include the 3% buyers fee.


241 Heads Assembled with Comp 918 valve springs - $230

Comp Cams 224/224 .581/.581 114LSA - Sold

LS1 Stock Lifters (set of 16) - $20

LS1 Stock Pistons and Rods w/bolts - $95

LS1 Stock Timing chain 3 sets - $20 each

LS1 Stock Oil Pumps (3) - $25 each

LS1 Stock 28.8lb Injectors - $95

4th Gen 155mph Gauge Cluster for Trans AM- $40
(no idea on mileage)

Stock LS1 Pushrods - $15

Stock LS1 Valve Springs - $20

Stock LS1 MAF - $40


Nitrous Express Wet Kit that comes with: Large Solenoids for 250+ shot, purge, blow down tube, 10lb bottle, All braided lines, bottle warmer, WOT switch, and FJO Progressive Controller - SOLD

Sony PSP Like New (no scratches) and comes with 1gb memory stick, some stupid skatboarding movie, God of War Theme, and PSP Battle collection Arcade Games - $100

 

How extreme is the cam? Level 1-10 and are the heads built for the cam????

 

Cam is probably a 4-5 on a scale of 10. Its on the line between mild to moderate. It sounds a lot more agressive than it really is. That could have been just because I have headers with single chambers. The 918 springs were put on the heads to support this cam.

 

I'm trying to stay streetable... How much mpg would it drop... And I know that thats kinda an ironic question....
But the heads are stock heads with upgraded springs????

 

How many miles on the cam, springs, and injectors?

 

Cam has about 12K on it, and the springs have the same. The injectors have 80K on them but were in perfect working order when removed.

The heads are stock heads for a 2001-2002 F-body car. They had new comp 918 springs put on them a little over a year ago.

I still got a little over 20mpg with this cam, but I also had a 4.10 gear. With stock gear, you can probably still get around 25-26mpg.

 

How many miles do the lifters have on them?

 

Same as injectors, 80K. They should be fine in a mildly cammed car, but I would not recommend them for anything over .590 lift.

 

how much for the nitrous if i come get it? i am in GA....and this is fora ready to go kit right?

 

very interested in cam sent u a pm

 

You can have it all right off my car for $525. I still have around 6lbs of nitrous in the bottle too so you can have that as a bonus. Since it won't be shipped, I won't drain it. Nitrous cost $5 per lb around here.

 

Let me know if you're willing to part out the FJO Progressive controller.

 

I am willing. If BlackFormulaLS1 doesn't want it with the kit, then i'll sell it seperately for $160 shipped.

 

if seperating... how much for purge solenoid?

 

where are you at in NC? how far from fort stewart ga? i may just drive up there and get the kit from you..is there abank of america up there? be easier to withdraw from savings and just hand you the cash in person ya know?

 

bump for a badass nitrous kit for a street car! this thing has taken many a name!

 

I'm in Spartanburg, SC. I've went to Ft. Stewart last year and it took me almost 4 hours to get there. You just hop on I-95 and head north until you get to I-26 and then head West. You will eventually come to I-85. I live just minutes from the 26-85 intersection. Yes, we have Bank of America here.

 

I was only going to seperate the FJO from the kit. Sorry.

 

well if i pull the cash out tomorrow can i meet you some where in the middle? i am driving my ddoge 4x4 quad cab...stupid 5.9L auto..20" wheels...not great on fuel...

 

ttt..............please?