Textrailia Clutch 0700
Textrailia Clutch 0700 SOLD SOLD SOLD thanks LS1tech!!!
Bought this clutch for my L92 but i'm needing the money at the moment.. bought from another member on here, here is the text from the original ad-
"Textralia 0700AB= This setup has 1,400 miles on it and ZERO track passes (when I spun some crank bearings from oil starvation). When a new motor was being put in my friend cross threaded 3 bolts. I couldn't wait on this one to get fixed so I overnighted a new clutch and just held on to this one. All that is needed is to heli-coil 3 of the holes. Personally, I'd do all of them to ensure it never happened again. I paid $1050 for this clutch. I'll take $500+paypal fees and S/H"
So I am asking the same amount, $500 plus shipping and paypal fee (3%). I haven't done anything to it although I looked at the threads and they arent that bad, but I had an estimate done on helicoiling and it was about $50 for the whole job at a local machine shop..pretty cheap.. located in Portland Oregon..
Thanks!!
Chris
Bought this clutch for my L92 but i'm needing the money at the moment.. bought from another member on here, here is the text from the original ad-
"Textralia 0700AB= This setup has 1,400 miles on it and ZERO track passes (when I spun some crank bearings from oil starvation). When a new motor was being put in my friend cross threaded 3 bolts. I couldn't wait on this one to get fixed so I overnighted a new clutch and just held on to this one. All that is needed is to heli-coil 3 of the holes. Personally, I'd do all of them to ensure it never happened again. I paid $1050 for this clutch. I'll take $500+paypal fees and S/H"
So I am asking the same amount, $500 plus shipping and paypal fee (3%). I haven't done anything to it although I looked at the threads and they arent that bad, but I had an estimate done on helicoiling and it was about $50 for the whole job at a local machine shop..pretty cheap.. located in Portland Oregon..
Thanks!!
Chris
Last edited by VintageCamaroChris; Sep 10, 2008 at 08:21 PM.
So are you talking about the threads on the flywheel that are stripped? And what does this come with flywheel, clutch disc, and pressure plate? Also, is this an Z or X grip?
It is a Z grip with the 6 puck style disc. Yes the holes for the Pressure plate bolts need to be either tapped or Heli coiled or something, I think there are 3 that were crossthreaded.
hers a couple pics of it- its this one http://www.textralia.com.au/productD...7EA875D97466AD they list for $979 plus shipping..
hers a couple pics of it- its this one http://www.textralia.com.au/productD...7EA875D97466AD they list for $979 plus shipping..
Last edited by VintageCamaroChris; Sep 22, 2008 at 08:43 PM.
